openvswitch (2.5.0-0ubuntu1) xenial; urgency=medium

  * New upstream release.

 -- James Page <james.page@ubuntu.com>  Thu, 10 Mar 2016 14:09:14 +0000

openvswitch (2.5.0~git20160219.522aca6-0ubuntu3) xenial; urgency=medium

  * d/rules,control,openvswitch-switch-dpdk.*: Install DPDK enabled binaries
    into a new package (replacing the one from src:openvswitch-dpdk) rather
    than shipping alongside the vanilla binaries (LP: #1550254).
  * d/openvswitch-switch.*: Tidy up alternatives related to ovs-vswitchd-dpdk
    in 2.5.0~git20160219.522aca6-0ubuntu2.
  * d/tests/*: Refactor, exercise vanilla and dpdk enabled binaries where
    possible.

 -- James Page <james.page@ubuntu.com>  Fri, 26 Feb 2016 12:39:27 +0000

openvswitch (2.5.0~git20160219.522aca6-0ubuntu2) xenial; urgency=medium

  * [9c970b06] d/rules,*.manpages,*.install: Prepare for dual build.
  * [f7dff3e7] DPDK enablement (LP: #1492186):
    - d/p/system-dpdk.patch: Pick patch from openvswitch-dpdk to
      support use with libdpdk-dev.
    - d/control: Add DPDK dependencies for supported archs.
    - d/rules: Build DPDK enabled binaries for supported archs.
    - d/openvswitch-switch.p*: Install ovs-vswitch-dpdk binary as an
      alternative.
    - d/openvswitch-switch.README.Debian: Let users know how to use
      the DPDK binary.

 -- James Page <james.page@ubuntu.com>  Wed, 24 Feb 2016 21:44:41 +0000

openvswitch (2.5.0~git20160219.522aca6-0ubuntu1) xenial; urgency=medium

  * [7c4c30b] Imported upstream snapshot 2.5.0~git20160219.522aca6.

 -- James Page <james.page@ubuntu.com>  Fri, 19 Feb 2016 13:51:49 +0000

openvswitch (2.5.0~git20160129.46a88d9-0ubuntu1) xenial; urgency=medium

  * [099b995] d/rules: Switch to 2.5 branch for snapshots.
  * [aee4d60] Imported upstream snapshot 2.5.0~git20160129.46a88d9
  * [b5d8f41] d/p/*: Refresh patches.
  * [97855b9] d/control,ovn*: Sync packaging changes from upstream for
              experimental OVN support.
  * [5c2ef1d] d/*.init: Tidy up init.d-script-does-not-source-init-functions
              lint.
  * [f3434f7] d/control: Add dh-python to BD's.
  * [81a7cca] d/control: Fixup breaks/replaces for upgrades.
  * [c19cf60] d/*.init Ensure _SYSTEMCTL_SKIP_REDIRECT is set prior to
              inclusion of init-functions.
  * [a7d5430] d/openvswitch-switch.openvswitch-nonetwork.service: Pass
              OVS_CTL_OPTS instead of OPTIONS to ovs-ctl on startup.
  * [d19098f] d/p/ovs-ctl-dpdk.patch: Sort out tab/space formatting.
  * [9e3989e] d/control: Add libcap-ng-dev to BD's to support running
              ovs daemons as non-root users.

 -- James Page <james.page@ubuntu.com>  Fri, 29 Jan 2016 11:44:50 +0100

openvswitch (2.4.0-0ubuntu5) xenial; urgency=high

  * Skip tests on s390x, for the same reason as powerpc see 1483572.

 -- Dimitri John Ledkov <xnox@ubuntu.com>  Tue, 26 Jan 2016 10:38:48 +0000

openvswitch (2.4.0-0ubuntu4) wily; urgency=medium

  [ Arata Notsu ]
  * Fix ifupdown hooks in cases where BRIDGE is not defined. (LP: #1314887)

 -- Chris J Arges <chris.j.arges@canonical.com>  Thu, 15 Oct 2015 15:03:34 -0500

openvswitch (2.4.0-0ubuntu3) wily; urgency=medium

  [ Brian Turek ]
  * Add ifupdown hooks for upstart script. (LP: #1314887)

 -- Chris J Arges <chris.j.arges@canonical.com>  Wed, 14 Oct 2015 13:51:13 -0500

openvswitch (2.4.0-0ubuntu2) wily; urgency=medium

  * Install ovs-vswitchd binary using alternatives for all architectures
    to support use of alternative DPDK enabled binaries (LP: #1499759):
    - d/rules: Move ovs-vswitchd to /usr/lib/openvswitch-switch.
    - d/openvswitch-switch.{postinst,prerm}: Install binary using
      alternatives.
    - d/openvswitch-switch.default: Add some example DPDK options
      (disabled by default).
    - d/p/ovs-ctl-dpdk.patch: Splice in DPDK options to ovs-vswitchd
      startup arguments if provided.

 -- James Page <james.page@ubuntu.com>  Mon, 28 Sep 2015 16:29:30 +0100

openvswitch (2.4.0-0ubuntu1) wily; urgency=medium

  * Update to 2.4.0 release from previous snapshot.

 -- James Page <james.page@ubuntu.com>  Tue, 01 Sep 2015 11:53:49 +0100

openvswitch (2.4.0~git20150810.97bab95-0ubuntu2) wily; urgency=medium

  * d/rules: Skip unit tests on powerpc - see https://pad.lv/1483572 for
    full details.

 -- James Page <james.page@ubuntu.com>  Tue, 11 Aug 2015 09:26:13 +0100

openvswitch (2.4.0~git20150810.97bab95-0ubuntu1) wily; urgency=medium

  * New upstream snapshot from 2.4 branch:
    - d/*: Align any relevant packaging changes with upstream.
  * d/*: wrap-and-sort.
  * d/openvswitch-{common,vswitch}.install: Correct install location for
    bash completion files.
  * d/tests/openflow.py: Explicitly use ovs-testcontroller as provided
    by 2.4.0 release.

 -- James Page <james.page@ubuntu.com>  Mon, 10 Aug 2015 11:35:15 +0100

openvswitch (2.3.2-0ubuntu3) wily; urgency=medium

  * d/tests/openflow.py: Use net.addLink to add links between switches and
    hosts to ensure that they get cleanup up after use, fixing autopkgtest
    failures.

 -- James Page <james.page@ubuntu.com>  Fri, 17 Jul 2015 12:48:25 +0100

openvswitch (2.3.2-0ubuntu2) wily; urgency=medium

  * d/p/rules: Skip test 717 due to failure on powerpc - see
    http://pad.lv/1472202 for full details.

 -- James Page <james.page@ubuntu.com>  Tue, 07 Jul 2015 11:15:12 +0100

openvswitch (2.3.2-0ubuntu1) wily; urgency=medium

  * New upstream point release.
  * Refresh all patches.

 -- James Page <james.page@ubuntu.com>  Tue, 30 Jun 2015 14:34:02 +0100

openvswitch (2.3.1-0ubuntu1) vivid; urgency=low

   * New upstream release.
   * d/rules,*.manpages: Rewrite to use more standard debhelper sequencing.
   * d/automake.mk,openvswitch-switch.default,rules:
     Rename openvswitch-switch.template -> openvswitch-switch.default.
   * Enable systemd support:
     - d/openvswitch-switch.service,
       d/openvswitch-switch.openvswitch-nonetwork.service:
       Systemd unit files, derived from RHEL versions.
     - d/control: Add BD on dh-systemd.
     - d/rules: Enable systemd helper, explicit no-start install of
       openvswitch-nonetwork unit.
     - d/ifupdown.sh: Tweak to support use with systemd ifinstalled.
   * d/control: Bumped Standards-Version 3.9.6, no changes.
   * d/tests/common: Drop module reload checks, as we always use the
     in-tree kernel module now.
   * d/python-openvswitch.*,openvswitch-test.*,automake.mk:
     Tidy up install of Python components.

 -- James Page <james.page@ubuntu.com>  Thu, 18 Dec 2014 12:36:25 +0000

openvswitch (2.3.0+git20140819-2ubuntu2) vivid; urgency=medium

  * Resolve DEP-8 test failures:
    - d/tests/openflow.py: Explicitly configure switches to use
      OpenFlow 1.0 protocol.
    - d/tests/control: Version dependency on mininet >= 2.2.0~
      to support specification of protocol version.
  * d/tests/openflow.py: format to flake8 standard.

 -- James Page <james.page@ubuntu.com>  Mon, 24 Nov 2014 14:41:55 +0000

openvswitch (2.3.0+git20140819-2ubuntu1) vivid; urgency=medium

  * Merge from Debian unstable, remaining changes:
    - d/control,tests: Add autopkg tests.
    - d/control,openvswitch-testcontroller*: Add binary package for
      test controller to support use with mininet.
    - d/rules,*.upstart: Add upstart configurations for openvswitch-switch.
    - d/p/xcp-interface-reconfigure.patch: Add support for Debian
      packaged xcp-xapi if found.
    - d/rules: Ensure dh_autoreconf_clean is called.
    - d/rules: Add helper for generating snapshot from upstream git repo.
    - d/control,compat: Bump debhelper compat level to 9.
    - d/control: Bump Standards-Version to 3.9.5, no changes.
    - d/control: Add alternative dependency - kmod | module-init-tools.
  * d/control: Add missing ${shlibs:Depends} to openvswitch-testcontroller.
  * d/tests/*: Drop dkms and module assistant tests now that we no longer
    ship the datapath kernel module.
  * d/rules: Align snapshot creation to new repo location and 2.3 branch.

 -- James Page <james.page@ubuntu.com>  Wed, 12 Nov 2014 14:03:17 +0000

openvswitch (2.3.0+git20140819-2) unstable; urgency=low

  * debian/rules: Rerun checks on tests that fail the first time.  Skip
    tests 711, 712, and 713 that seem to fail due to races on buildds.
  * debian/patches/cfm-avoid-long-delay: Upstream patch to avoid
    test failures in CFM tests due to "long delay" log messages at WARN level.
  * debian/patches/ovs-appctl-log-options.patch,
    debian/patches/disable-poll-loop-logging-for-long-output.patch:
    Upstream patches to avoid test failures in tests that generate a ton
    of output.

 -- Ben Pfaff <pfaffben@debian.org>  Wed, 20 Aug 2014 08:31:11 -0700

openvswitch (2.3.0+git20140819-1) unstable; urgency=low

  * New upstream release:
   - OpenFlow 1.1, 1.2, and 1.3 are now enabled by default in
     ovs-vswitchd.
   - Linux kernel datapath now has an exact match cache optimizing the
     flow matching process.
   - Datapath flows now have partially wildcarded tranport port field
     matches.  This reduces userspace upcalls, but increases the
     number of different masks in the datapath.  The kernel datapath
     exact match cache removes the overhead of matching the incoming
     packets with the larger number of masks, but when paired with an
     older kernel module, some workloads may perform worse with the
     new userspace.
  * Removed datapath packages because Linux 3.16 has adequate built-in
    support.  Closes: #740983.
    - debian/control: Remove datapath package references.  Add build
      dependency on dh-autoreconf.
    - debian/rules: Don't build datapath packages.
    - debian/openvswitch-datapath-*: Removed.
    - debian/control.modules.in: Removed.
    - debian/dkms.conf.in: Removed.
    - debian/rules.modules: Removed.
    - debian/openvswitch-switch.README.Debian: Removed references to kernel
      packages.
    - debian/openvswitch-switch.init: Removed references to kernel packages.
    - debian/automake.mk: Remov references to deleted files.
    - debian/rules: Adopt use of dh-autoreconf.

 -- Ben Pfaff <pfaffben@debian.org>  Tue, 19 Aug 2014 08:19:21 -0700

openvswitch (2.3.0-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
   - OpenFlow 1.1, 1.2, and 1.3 are now enabled by default in
     ovs-vswitchd.
   - Linux kernel datapath now has an exact match cache optimizing the
     flow matching process.
   - Datapath flows now have partially wildcarded tranport port field
     matches.  This reduces userspace upcalls, but increases the
     number of different masks in the datapath.  The kernel datapath
     exact match cache removes the overhead of matching the incoming
     packets with the larger number of masks, but when paired with an
     older kernel module, some workloads may perform worse with the
     new userspace.

 -- Open vSwitch team <dev@openvswitch.org>  Thu, 14 Aug 2014 11:03:32 -0700

openvswitch (2.2.0-1) unstable; urgency=low

   [ Open vSwitch team ]
   * New upstream version
   - Internal ports are no longer brought up by default, because it
     should be an administrator task to bring up devices as they are
     configured properly.
   - ovs-vsctl now reports when ovs-vswitchd fails to create a new port or
     bridge.
   - The "ovsdbmonitor" graphical tool has been removed, because it was
     poorly maintained and not widely used.
   - New "check-ryu" Makefile target for running Ryu tests for OpenFlow
     controllers against Open vSwitch.  See INSTALL for details.
   - Added IPFIX support for SCTP flows and templates for ICMPv4/v6 flows.
   - Upon the receipt of a SIGHUP signal, ovs-vswitchd no longer reopens its
     log file (it will terminate instead). Please use 'ovs-appctl vlog/reopen'
     instead.
   - Support for Linux kernels up to 3.14. From Kernel 3.12 onwards OVS uses
     tunnel API for GRE and VXLAN.
   - Added experimental DPDK support.
   - Added support for custom vlog patterns in Python

 -- Open vSwitch team <dev@openvswitch.org>  Wed, 19 Mar 2014 16:08:38 -0700

openvswitch (2.1.3-0ubuntu1) utopic; urgency=medium

  * New upstream release.
  * d/control: Drop hardening-wrapper from build Depends.
  * d/compat,control: Bump debhelper compat level to 9.

 -- James Page <james.page@ubuntu.com>  Fri, 15 Aug 2014 09:17:45 +0100

openvswitch (2.1.2-0ubuntu3) utopic; urgency=medium

  * Ensure test-controller is built on all architectures:
    - d/control: Introduce new openvswitch-testcontroller package.
    - d/{openvswitch-testcontroller,openvswitch-test}.{install,manpages}:
      Move test-controller binary to new testcontroller package. 
    - d/tests/control: Use openvswitch-testcontroller instead of
      openvswitch-test.

 -- James Page <james.page@ubuntu.com>  Mon, 02 Jun 2014 13:02:01 +0100

openvswitch (2.1.2-0ubuntu2) utopic; urgency=high

  * No change rebuild against new dh_installinit, to call update-rc.d at
    postinst.

 -- Dimitri John Ledkov <xnox@ubuntu.com>  Wed, 28 May 2014 10:41:42 +0100

openvswitch (2.1.2-0ubuntu1) utopic; urgency=medium

  * New upstream release:
    - d/*: Resync packaging with upstream:
      + Drop openvswitch-{controller,pki} and ovsdbmonitor packages.
      + Drop openvswitch-pki targets from automake.mk.
      + Add openvswitch-vtep package.
    - d/tests/control,common: Drop use of openvswitch-controller in
      preference of openvswitch-test.
    - d/openvswitch-test.{install,manpages}: Provide test-controller
      for continued use by mininet for ovs testing.

 -- James Page <james.page@ubuntu.com>  Mon, 19 May 2014 14:05:29 +0100

openvswitch (2.1.0+git20140411-3) unstable; urgency=low

  * debian/rules: Disable some tests that tend to fail on Debian buildds
    due to race conditions.

 -- Ben Pfaff <pfaffben@debian.org>  Fri, 13 Jun 2014 06:07:31 -0700

openvswitch (2.1.0+git20140411-2) unstable; urgency=low

  * debian/openvswitch-switch.postinst: Add back mysteriously deleted
    "mkdir" line.  Closes: #744769.  Thanks to Joshua Powers for reporting
    this bug.
  * debian/rules: Try rechecking in serial any tests that fail in
    parallel, as an experiment to see whether this fixes remaining buildd
    test failures.

 -- Ben Pfaff <pfaffben@debian.org>  Mon, 14 Apr 2014 08:29:33 -0700

openvswitch (2.1.0+git20140411-1) unstable; urgency=low

  * New upstream release:
    - Removed ovsdbmonitor package.  Closes: #744136.
    - Fix misaligned data accesses that caused test failures.
  * tests/ofproto-macros.at: Disable scanning logs for WARN and ERR messages,
    as an experiment to see whether this fixes all the buildd test failures.

 -- Ben Pfaff <pfaffben@debian.org>  Fri, 11 Apr 2014 08:35:10 -0700

openvswitch (2.1.0+git20140325-1) unstable; urgency=low

  * New upstream release.
    - Included kernel module builds against Linux 3.11.  Closes: #732260.
    - Log rotation bug fixed.  Closes: #729304.
    - Bridge compatibility feature removed.  Closes: #680538, #681954.
    - Controller package removed.  Closes: #731133.
  * Shut down OVS after libvirt guests to allow those guests to remove
    their interfaces gracefully. Closes: #701760.  Reported by Ernesto
    Domato <edomat@gmail.com>.  Fix from Lukasz Szotek
    <szotman@gmail.com>.
  * debian/control: Depend on kmod instead of module-init-tools.  Closes:
    #733696.  Reported by md@Linux.IT (Marco d'Itri).

 -- Ben Pfaff <pfaffben@debian.org>  Mon, 31 Mar 2014 09:31:10 -0700

openvswitch (2.0.1+git20140120-0ubuntu2) trusty; urgency=medium

  * Rebuild to drop files installed into /usr/share/pyshared.

 -- Matthias Klose <doko@ubuntu.com>  Sun, 23 Feb 2014 13:49:27 +0000

openvswitch (2.0.1+git20140120-0ubuntu1) trusty; urgency=medium

  * New upstream snapshot:
    - d/p/0001-Add-check-for-latomic.patch: Dropped - included in snapshot.
  * d/p/fix-3.11-support.patch: Cherry pick fix for >= 3.11 GRE support
    from upstream VCS (LP: #1270649).
  * d/tests/dkms,ma: Gate test execution on <= 3.13 kernel.

 -- James Page <james.page@ubuntu.com>  Mon, 20 Jan 2014 12:55:24 +0000

openvswitch (2.0.1+git20140106-0ubuntu1) trusty; urgency=medium

  * New upstream snapshot.

 -- James Page <james.page@ubuntu.com>  Mon, 06 Jan 2014 17:32:42 +0000

openvswitch (2.0.0+git20131203-0ubuntu1) trusty; urgency=low

  * New upstream snapshot.
  * d/rules: Switch snapshot branch to branch-2.0.
  * Rework checks for -latomic:
    - d/p/0001-Add-check-for-latomic.patch: Add autoconf checks to see
      if -latomic is required when linking test-atomic.
    - d/p/atomic-test.patch: Dropped in preference to new patch.

 -- James Page <james.page@ubuntu.com>  Thu, 05 Dec 2013 10:08:20 +0000

openvswitch (2.0.0-0ubuntu3) trusty; urgency=low

  * d/rules,control: Switch to using dh-autoreconf for clean package builds.
  * d/p/kernel-3.12-support.patch: Add support for 3.12 kernel.
  * d/tests/control,kernel,common: Add kernel test to exercise in-tree
    openvswitch module, run openflow test against all module sources instead
    of standalone at the end of other tests.

 -- James Page <james.page@ubuntu.com>  Mon, 11 Nov 2013 12:23:01 +0000

openvswitch (2.0.0-0ubuntu2) trusty; urgency=low

  * d/p/atomic-test.patch: Link atomic test with -latomic for powerpc.

 -- Adam Conrad <adconrad@ubuntu.com>  Sun, 03 Nov 2013 21:07:20 -0700

openvswitch (2.0.0-0ubuntu1) trusty; urgency=low

  * New upstream release:
    - d/p/kernel-3.11-support.patch: Cherry picked fix from upstream VCS
      for 3.11 kernel support.
    - Drop all other patches, no longer required.
  * d/p/xcp-interface-reconfigure.patch: Detect and use packaged XCP XAPI
    interface-reconfigure hook if installed (LP: #1195053).

 -- James Page <james.page@ubuntu.com>  Mon, 28 Oct 2013 13:15:45 +0000

openvswitch (1.10.2-0ubuntu2) saucy; urgency=low

  * d/p/boot.patch: Re-execution of boot.sh to ensure that new files
    introduced via patches are included in the dkms and source packages
    (LP: #1229222).

 -- James Page <james.page@ubuntu.com>  Mon, 23 Sep 2013 15:50:06 +0100

openvswitch (1.10.2-0ubuntu1) saucy; urgency=low

  * New upstream point release.

 -- James Page <james.page@ubuntu.com>  Sat, 07 Sep 2013 08:48:22 +0100

openvswitch (1.10.1+git20130823-0ubuntu3) saucy; urgency=low

  * d/openvswitch-switch.openvswitch-force-reload-kmod.upstart: Deal with
    instances where openvswitch-switch is not already running, use
    modprobe -r instead of rmmod to remove kernel modules.

 -- James Page <james.page@ubuntu.com>  Wed, 28 Aug 2013 13:32:38 +0100

openvswitch (1.10.1+git20130823-0ubuntu2) saucy; urgency=low

  * Fully support transitions from openvswitch module in 3.11 kernel to
    DKMS module:
    - d/openvswitch-switch.openvswitch-force-reload-mod.upstart: Drop the
      gre module when force reloading to make transitions from native kernel
      module to dkms module work.
    - d/NEWS: Drop information about DKMS/kernel compatibility with GRE
      tunnels. 

 -- James Page <james.page@ubuntu.com>  Sat, 24 Aug 2013 09:41:02 +0100

openvswitch (1.10.1+git20130823-0ubuntu1) saucy; urgency=low

  * New upstream snapshot.
    - d/p/*.patch: Rebase on 1.10 branch with upstream submitted fixes
      for Linux 3.11 kernel compatibility (LP: #1213879). 
    - d/NEWS: Add note about GRE tunnel support in the Linux 3.11 native
      kernel module with advice on use of -dkms package in this configuration.
  * Add Upstart configuration for openvswitch-switch (LP: #1084028):
    - d/openvswitch-switch.upstart: Add upstart configuration to support
      use during early boot.
    - d/rules,openvswitch-switch.openvswitch-force-reload-mod.upstart: Add
      helper to replace 'service openvswitch-switch force-reload-kmod'.
    - d/openvswitch-switch.preinst: Stop versions earlier than this version
      prior to install due to switch to upstart configuration.
    - d/NEWS: Let users know about this change and how to force a reload
      of the openvswitch kernel module.
    - d/tests/dkms,common: Update to work with upstart configuration.

 -- James Page <james.page@ubuntu.com>  Fri, 23 Aug 2013 11:18:52 +0100

openvswitch (1.10.1+git20130627-0ubuntu2) saucy; urgency=low

  * Allow compile with Linux 3.11 kernel
    - d/p/0005-datapath-Allow-compile-with-linux-3.11.patch
      Extend version checking to include the new kernel version.

 -- Stefan Bader <stefan.bader@canonical.com>  Sat, 03 Aug 2013 12:12:08 +0100

openvswitch (1.10.1+git20130627-0ubuntu1) saucy; urgency=low

  * New upstream snapshot:
    - d/p/0007-tests-Tolerate-init-process-pid-1.patch: Dropped; included
      in snapshot.
    - d/p/*lacp*: Drop patches related to lacp test changes; not required
      for this series.
    - d/*: Sync relevant packaging changes.
  * Provide initial support for Linux 3.10 kernel:
    - d/p/0004-datapath-Fixup-compatibility-with-linux-3.10.patch:
      Fixup compatibility with Linux 3.10; this is not full support for
      all new 3.10 features - it simply maintains compatibility for the
      existing codebase.
  * d/rules: Add get-orig-snapshot target for creating snapshots from
    upstream VCS.

 -- James Page <james.page@ubuntu.com>  Mon, 01 Jul 2013 09:45:12 +0100

openvswitch (1.10.0-0ubuntu5) saucy; urgency=low

  * d/p/0007-tests-Tolerate-init-process-pid-1.patch: Resync with upstream
    accepted fix for FTBFS with upstart user sessions enabled, supercedes
    fix-init-user-sessions.patch with a more reliable test.

 -- James Page <james.page@ubuntu.com>  Fri, 21 Jun 2013 09:43:18 +0100

openvswitch (1.10.0-0ubuntu4) saucy; urgency=low

  * Fix FTBFS when upstart user sessions are enabled:
    - d/p/fix-init-user-sessions.patch: init is not pid == 1 when building
      on Ubuntu with user sessions enabled; just check that the cmd name
      of the init process is 'init' instead.

 -- James Page <james.page@ubuntu.com>  Thu, 20 Jun 2013 18:46:17 +0100

openvswitch (1.10.0-0ubuntu3) saucy; urgency=low

  * d/rules: Disable testing on powerpc architecture
    https://bugs.launchpad.net/ubuntu/+source/openvswitch/+bug/1189408. 

 -- James Page <james.page@ubuntu.com>  Mon, 10 Jun 2013 11:20:56 +0100

openvswitch (1.10.0-0ubuntu2) saucy; urgency=low

  * Fix FTBFS on powerpc architecture:
    - d/p/{0004,0005,0006}*.patch: Cherry picked fixes from upstream VCS
      for failing lacp test.

 -- James Page <james.page@ubuntu.com>  Mon, 10 Jun 2013 10:30:10 +0100

openvswitch (1.10.0-0ubuntu1) saucy; urgency=low

  * New upstream release:
    - d/p/handle-unix-socket-long-paths.patch: Dropped - included
      upstream.
    - d/control,NEWS: Drop openvswitch-brcompat package as feature has
      been dropped upstream, added NEWS entry to let users know.
    - d/tests: Update tests to drop brcompat module testing.
  * Add support for Linux 3.9 kernel (LP: #1180385):
    - d/p/0001-datapath-hlist-drop-the-node-parameter-from-iterator.patch:
      Cherry picked fix from upstream master branch to remove dropped
      node parameter from hlist calls.
    - d/p/0002-Add-support-for-linux-3.9-kernel.patch:
      Include the 3.9 kernel in the list of supported kernel versions.
    - d/p/0003-datapath-Backport-simplified-hlist-iterators.patch:
      Cherry picked fix to provide backported hlist iterators for older
      kernels.
    - d/rules: Always run boot.sh to pickup above changes.

 -- James Page <james.page@ubuntu.com>  Mon, 03 Jun 2013 15:40:43 +0100

openvswitch (1.9.3+git20131029-1) unstable; urgency=low

  * New upstream release.
    - Fixes opening Unix sockets with very long names from Python.

 -- Ben Pfaff <pfaffben@debian.org>  Tue, 29 Oct 2013 08:31:55 -0700

openvswitch (1.9.3+git20131028-1) unstable; urgency=low

  * New upstream release.
    - Fixes "make check" with non-ASCII characters in present working 
      directory.  Closes: #719736.

 -- Ben Pfaff <pfaffben@debian.org>  Mon, 28 Oct 2013 08:40:31 -0700

openvswitch (1.9.3+git20131021-1) unstable; urgency=low

  * New upstream version:
    - Fixes unaligned access issues in bug #719736.
    - Other bug fixes.
  * Other half of bug #719736 has probably not been addressed.  I don't
    understand it and want to see if it recurs in the autobuilders with
    the unaligned accesses fixed.

 -- Ben Pfaff <pfaffben@debian.org>  Mon, 21 Oct 2013 08:53:11 -0700

openvswitch (1.9.3-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
    - Bug fixes

 -- Open vSwitch team <dev@openvswitch.org>  Thu, 29 Aug 2013 17:02:33 -0700

openvswitch (1.9.2+git20130813-1) unstable; urgency=low

  * New upstream version.  Closes: #701758.
    - debian/patches: All patches dropped because they have been
      incorporated upstream.
    - Supports kernels up to 3.8.  Closes: #710125.
  
 -- Ben Pfaff <pfaffben@debian.org>  Fri, 07 Jun 2013 14:15:01 -0700

openvswitch (1.9.2-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
    - Bug fixes

 -- Open vSwitch team <dev@openvswitch.org>  Fri, 05 Apr 2013 18:37:19 -0700

openvswitch (1.9.1-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
    - Bug fixes

 -- Open vSwitch team <dev@openvswitch.org>  Tue, 14 Mar 2013 17:27:19 -0700

openvswitch (1.9.0-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
    - Datapath:
      - Support for ipv6 set action.
      - SKB mark matching and setting.
      - support for Linux kernels up to 3.8
    - FreeBSD is now a supported platform, thanks to code contributions from
      Gaetano Catalli, Ed Maste, and Giuseppe Lettieri.
    - ovs-bugtool: New --ovs option to report only OVS related information.
    - New %t and %T log escapes to identify the subprogram within a
      cooperating group of processes or threads that emitted a log message.
      The default log patterns now include this information.
    - OpenFlow:
      - Allow bitwise masking for SHA and THA fields in ARP, SLL and TLL
        fields in IPv6 neighbor discovery messages, and IPv6 flow label.
      - Adds support for writing to the metadata field for a flow.
    - Tunneling:
      - The tunneling code no longer assumes input and output keys are
        symmetric.  If they are not, PMTUD needs to be disabled for
        tunneling to work. Note this only applies to flow-based keys.
      - New support for a nonstandard form of GRE that supports a 64-bit key.
      - Tunnel Path MTU Discovery default value was set to 'disabled'.
        This feature is deprecated and will be removed soon.
      - Tunnel header caching removed.
    - ovs-ofctl:
      - Commands and actions that accept port numbers now also accept keywords
        that represent those ports (such as LOCAL, NONE, and ALL).  This is
        also the recommended way to specify these ports, for compatibility
        with OpenFlow 1.1 and later (which use the OpenFlow 1.0 numbers
        for these ports for different purposes).
    - ovs-dpctl:
      - Support requesting the port number with the "port_no" option in
        the "add-if" command.
    - ovs-pki: The "online PKI" features have been removed, along with
      the ovs-pki-cgi program that facilitated it, because of some
      alarmist insecurity claims.  We do not believe that these claims
      are true, but because we do not know of any users for this
      feature it seems better on balance to remove it.  (The ovs-pki-cgi
      program was not included in distribution packaging.)
    - ovsdb-server now enforces the immutability of immutable columns.  This
      was not enforced in earlier versions due to an oversight.
    - The following features are now deprecated.  They will be removed no
      earlier than February 2013.  Please email dev@openvswitch.org with
      concerns.
        - Bridge compatibility.
        - Stable bond mode.
        - The autopath action.
        - Interface type "null".
        - Numeric values for reserved ports (see "ovs-ofctl" note above).
        - Tunnel Path MTU Discovery.
        - CAPWAP tunnel support.
    - The data in the RARP packets can now be matched in the same way as the
      data in ARP packets.

 -- Open vSwitch team <dev@openvswitch.org>  Tue, 26 Feb 2013 11:23:19 -0700

openvswitch (1.9.0-0ubuntu1) raring; urgency=low

  * New upstream release.
  * Added watch file. 

 -- James Page <james.page@ubuntu.com>  Fri, 01 Mar 2013 14:25:54 +0000

openvswitch (1.9.0~git20130225.cec7c9e-0ubuntu1) raring; urgency=low

  * New upstream snapshot.
  * d/rules.modules: Install built modules to updates/openvswitch to ensure
    that they override any kernel provided version of openvswitch. 

 -- James Page <james.page@ubuntu.com>  Mon, 25 Feb 2013 14:28:46 +0000

openvswitch (1.9.0~git20130207.84b39f2-0ubuntu2) raring; urgency=low

  * Add DEP-8 tests for dkms, module-assistant and openflow. 

 -- James Page <james.page@ubuntu.com>  Sun, 17 Feb 2013 20:40:09 +0000

openvswitch (1.9.0~git20130207.84b39f2-0ubuntu1) raring; urgency=low

  * New upstream snapshot from 1.9 branch:
    - d/p/support-linux-3.8.patch,
      d/p/linux-Makefile.main.in-acinclude-preparation-for-lin.patch:
      Dropped as included upstream.
  * Fix dependencies for ovsdbmonitor (LP: #1098324):
    - d/control: Add dependency on python-twisted-conch.
  * d/control: Bumped Standards-Version, no changes.

 -- James Page <james.page@ubuntu.com>  Thu, 07 Feb 2013 15:32:38 +0000

openvswitch (1.9.0~git20130115.ca71f5b-0ubuntu2) raring; urgency=low

  * Fix typo in debian/openvswitch-controller.default (LP: #1094556).

 -- Logan Rosen <logatronico@gmail.com>  Thu, 17 Jan 2013 19:24:45 +0000

openvswitch (1.9.0~git20130115.ca71f5b-0ubuntu1) raring; urgency=low

  * New upstream snapshot based on branch-1.9:
    - d/patches: Dropped all previous patches as all found upstream.
    - d/*: Synced packaging with upstream packaging changes.
    - d/control: Add libtool to BD's to support use of snapshot.
  * Fix compatibility with Linux 3.8 (LP: #1098650):
    - d/p/support-linux-3.8.patch:
      Accept Linux 3.8 as a compatible kernel version.
    - d/p/linux-Makefile.main.in-acinclude-preparation-for-lin.patch:
      Adjust autoconf checks to correctly detect new kernel header file names.
  * Fix python test issues caused by long UNIX socket paths:
    - d/p/handle-unix-socket-long-paths.patch:
      Workaround long UNIX socket paths by using /proc/self/fd on Linux.

 -- James Page <james.page@ubuntu.com>  Wed, 16 Jan 2013 11:22:40 +0000

openvswitch (1.8.0-1) unstable; urgency=low
   [ Open vSwitch team ]
   * New upstream version
    *** Internal only release ***
    - New FAQ.  Please send updates and additions!
    - Authors of controllers, please read the new section titled "Action
      Reproduction" in DESIGN, which describes an Open vSwitch change in
      behavior in corner cases that may affect some controllers.
    - ovs-l3ping:
        - A new test utility that can create L3 tunnel between two Open
          vSwitches and detect connectivity issues.
    - ovs-ofctl:
        - New --sort and --rsort options for "dump-flows" command.
        - "mod-port" command can now control all OpenFlow config flags.
    - OpenFlow:
      - Allow general bitwise masking for IPv4 and IPv6 addresses in
        IPv4, IPv6, and ARP packets.  (Previously, only CIDR masks
        were allowed.)
      - Allow support for arbitrary Ethernet masks.  (Previously, only
        the multicast bit in the destination address could be individually
        masked.)
      - New field OXM_OF_METADATA, to align with OpenFlow 1.1.
      - The OFPST_QUEUE request now reports an error if a specified port or
        queue does not exist, or for requests for a specific queue on all
        ports, if the specified queue does not exist on any port.  (Previous
        versions generally reported an empty set of results.)
      - New "flow monitor" feature to allow controllers to be notified of
        flow table changes as they happen.
    - Additional protocols are not mirrored and dropped when forward-bpdu is
      false.  For a full list, see the ovs-vswitchd.conf.db man page.
    - Open vSwitch now sends RARP packets in situations where it previously
      sent a custom protocol, making it consistent with behavior of QEMU and
      VMware.
    - All Open vSwitch programs and log files now show timestamps in UTC,
      instead the local timezone, by default.

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 16 Jul 2012 16:44:52 +0900

openvswitch (1.7.0-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - kernel modules are renamed. openvswitch_mod.ko is now
      openvswitch.ko and brcompat_mod.ko is now brcompat.ko.
    - Increased the number of NXM registers to 8.
    - Added ability to configure dscp setting for manager and controller
      connections.  By default, these connections have a DSCP value of
      Internetwork Control (0xc0).
    - Added the granular link health statistics, 'cfm_health', to an
      interface.
    - OpenFlow:
        - Added support to mask nd_target for ICMPv6 neighbor discovery flows.
        - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC)
          multipart messages.
    - ovs-ofctl:
        - Added the "dump-ports-desc" command to retrieve port
          information using the new port description multipart messages.
    - ovs-test:
        - Added support for spawning ovs-test server from the client.
        - Now ovs-test is able to automatically create test bridges and ports.
    - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows.
    - Tripled flow setup performance.
    - The "coverage/log" command previously available through ovs-appctl
      has been replaced by "coverage/show".  The new command replies with
      coverage counter values, instead of logging them.

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 30 Jul 2012 17:23:57 +0900

openvswitch (1.6.1-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - Allow OFPP_CONTROLLER as the in_port for packet-out messages.

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 25 Jun 2012 13:52:17 +0900

openvswitch (1.6.0-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - bonding
        - LACP bonds no longer fall back to balance-slb when negotiations fail.
          Instead they drop traffic.
        - The default bond_mode changed from SLB to active-backup, to protect
          unsuspecting users from the significant risks of SLB bonds (which are
          documented in vswitchd/INTERNALS).
        - Load balancing can be disabled by setting the bond-rebalance-interval
          to zero.
    - OpenFlow:
        - Added support for bitwise matching on TCP and UDP ports.
          See ovs-ofctl(8) for more information.
        - NXM flow dumps now include times elapsed toward idle and hard
          timeouts.
        - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows
          controllers more precise control over which OpenFlow messages they
          receive asynchronously.
        - New "fin_timeout" action.
        - Added "fin_timeout" support to "learn" action.
    - The default MAC learning timeout has been increased from 60 seconds
      to 300 seconds.  The MAC learning timeout is now configurable.
    - When QoS settings for an interface do not configure a default queue
      (queue 0), Open vSwitch now uses a default configuration for that
      queue, instead of dropping all packets as in previous versions.
    - Logging to console and file will have UTC timestamp as a default for all
      the daemons. An example of the default format is 2012-01-27T16:35:17Z.
      ovs-appctl can be used to change the default format as before.
    - New support for limiting the number of flows in an OpenFlow flow
      table, with configurable policy for evicting flows upon
      overflow.  See the Flow_Table table in ovs-vswitch.conf.db(5)
      for more information.
    - New "enable-async-messages" column in the Controller table.  If set to
      false, OpenFlow connections to the controller will initially have all
      asynchronous messages disabled, overriding normal OpenFlow behavior.
    - ofproto-provider interface:
        - "struct rule" has a new member "used" that ofproto implementations
          should maintain by updating with ofproto_rule_update_used().
    - ovsdb-client:
        - The new option --timestamp causes the "monitor" command to print
          a timestamp with every update.
    - CFM module CCM broadcasts can now be tagged with an 802.1p priority.

 -- Open vSwitch team <dev@openvswitch.org>  Fri, 24 Feb 2012 11:12:48 +0900

openvswitch (1.5.0-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - OpenFlow:
        - Added support for querying, modifying, and deleting flows
          based on flow cookie when using NXM.
        - Added new NXM_PACKET_IN format.
    - ovs-ofctl:
        - Added daemonization support to the monitor and snoop commands.
    - ovs-vsctl:
        - The "find" command supports new set relational operators
          {=}, {!=}, {<}, {>}, {<=}, and {>=}.
    - ovsdb-tool now uses the typical database and schema installation
      directories as defaults.

 -- Open vSwitch team <dev@openvswitch.org>  Fri, 01 June 2012 13:06:00 +0900

openvswitch (1.4.3-0ubuntu2) quantal-proposed; urgency=low

  * Re-enable the openvswitch-datapath-dkms package to enable support
    for gre tunnels between virtual switches which is not supported
    in the kernel provided openvswitch module (LP: #1068365). 
    - d/patches/0001->0008*.patch: Cherry picked patches from upstream
      trunk which enable support for the 3.5 linux kernel and align
      dkms module naming with kernel module naming.
    - d/dkms.conf.in: Drop _mod postfix from dkms module names.

 -- James Page <james.page@ubuntu.com>  Tue, 23 Oct 2012 17:24:17 +0200

openvswitch (1.4.3-0ubuntu1) quantal; urgency=low

  * New upstream release (LP: #1057098).
  * Dropped Debian patches:
    - debian/patches/debian-changes-1.4.2+git20120612-6
    - debian/patches/bug-681955-ovs-ctl-Start-the-rest-of-Open-vSwitch.patch
    - debian/patches/bug-684057-ovs-ctl-Add-support-for-newer-module-name.patch
    - debian/patches/debian-changes-1.4.2+git20120612-9
  * Dropped Ubuntu patches:
    - debian/patches/lp1044318-Reset-upper-layer-protocol-info.patch
  * Remaining changes:
    - debian/rules, debian/control: Enable hardening wrapper.
    - debian/control: Disable openvswitch-datapath-dkms package.

 -- Adam Gandelman <adamg@canonical.com>  Mon, 24 Sep 2012 14:55:07 -0700

openvswitch (1.4.2+git20120612-9ubuntu3) quantal; urgency=low

  * debian/patches/lp1044318-Reset-upper-layer-protocol-info.patch: Cherry
    picked upstream patch to avoid critical issues with SNAT/DNAT when OVS
    is chained with other Linux components. May be dropped with 1.4.3 upload.
    (LP: #1044318)

 -- Adam Gandelman <adamg@canonical.com>  Fri, 07 Sep 2012 12:12:03 -0700

openvswitch (1.4.2+git20120612-9ubuntu2) quantal; urgency=low

  * debian/rules, debian/control: Enable hardening wrapper.

 -- Chuck Short <zulcss@ubuntu.com>  Mon, 20 Aug 2012 19:39:58 -0500

openvswitch (1.4.2+git20120612-9ubuntu1) quantal; urgency=low

  * Merge from Debian unstable; remaining changes:
    - d/control: Disable openvswitch-datapath-dkms package.
  * Dropped changes:
    - d/patches/kernel_3.5_support.patch: Superceded by 
      bug-684057-ovs-ctl-Add-support-for-newer-module-name.patch

 -- James Page <james.page@ubuntu.com>  Tue, 07 Aug 2012 16:00:53 +0100

openvswitch (1.4.2+git20120612-9) unstable; urgency=low

  * Apply bug-684057-ovs-ctl-Add-support-for-newer-module-name.patch to
    allow use of the openvswitch kernel module integrated into 3.3 and
    later.  Closes: #684057.

 -- Ben Pfaff <pfaffben@debian.org>  Mon, 06 Aug 2012 16:59:01 -0700

openvswitch (1.4.2+git20120612-8) unstable; urgency=low

  * Apply further patches to fix bugs resulting from moving
    /etc/openvswitch/conf.db to /var/lib/openvswitch in -7.
    
    This required applying the following bug fix patches:

    bug-681880-3-Make-the-location-of-the-database-separately-configu.patch
    bug-681880-4-tests-Slightly-generalize-utility-function-tests.patch
    bug-681880-5-util-New-function-follow_symlinks.patch
    bug-681880-6-lockfile-Be-more-forgiving-about-lockfiles-for-symli.patch
    bug-681880-7-ovsdb-Do-not-replace-symlinks-by-regular-files-durin.patch
    bug-681880-8-Fix-a-typo-in-commit-f973f2af2.patch
    bug-681880-9-dirs-dbdir-default-must-be-based-on-sysconfdir.patch

  * debian/rules: Configure /var/lib/openvswitch as the database directory
    instead of working through symlinks.  (The symlinks are still created
    for compatibility with people and existing software that are
    accustomed to seeing the database in its original location, but the
    Debian packages themselves never use the symlinks.)

  * debian/openvswitch-switch.postrm: Also remove
    /ec/openvswitch/system-id.conf and conf.db backups on purge.

  * utilities/ovs-pki.in: Use mode 0700 instead of 0733 for
    openvswitch-pki "incoming" directory, by applying
    bug-683665-use-mode-700-for-pki-incoming-dir.patch.  See the patch for
    complete rationale.  Closes: #683665.  Thanks to Andreas Beckmann
    <debian@abeckmann.de> for reporting this bug.

  * debian/openvswitch-pki.postinst: Change mode of existing "incoming"
    directories to 0700 at configure time (see above).

 -- Ben Pfaff <pfaffben@debian.org>  Wed, 01 Aug 2012 11:20:21 -0700

openvswitch (1.4.2+git20120612-7) unstable; urgency=low

  * Move /etc/openvswitch/conf.db to /var/lib/openvswitch, using symlinks.
    Closes: #681880.  Thanks to Bastian Blank <waldi@debian.org> for
    reporting this bug.
    
    This required applying the following bug fix patches:

    bug-681880-1-lockfile-Fix-hang-locking-through-a-dangling-symlink.patch
    bug-681880-2-ovsdb-Make-ovsdb-tool-create-work-through-a-dangling.patch

  * Start the rest of OVS if bridge compatibility is enabled but the
    kernel bridge module cannot be loaded.  Closes: #681955.  Thanks to
    Bastian Blank <waldi@debian.org> for reporting this bug.
    
    This was fixed by applying the following bug fix patch:

    bug-681955-ovs-ctl-Start-the-rest-of-Open-vSwitch.patch    

 -- Ben Pfaff <pfaffben@debian.org>  Fri, 27 Jul 2012 12:36:03 -0700

openvswitch (1.4.2+git20120612-6) unstable; urgency=low

  * utilities/automake.mk: Fix duplicate mention of ovs-vsctl in
    bin_PROGRAMS and bin_SCRIPTS; it should only have been in the former.
    Closes: #682384.  Thanks to Bastian Blank <waldi@debian.org> for
    reporting this bug.

 -- Ben Pfaff <pfaffben@debian.org>  Mon, 23 Jul 2012 09:46:41 -0700

openvswitch (1.4.2+git20120612-5) unstable; urgency=low

  * debian/openvswitch-controller.postrm: Remove configuration files in
    /etc/openvswitch-controller on purge.  Closes: #682187.  Thanks to
    Andreas Beckmann <debian@abeckmann.de> for reporting this bug.

 -- Ben Pfaff <pfaffben@debian.org>  Fri, 20 Jul 2012 22:33:19 -0700

openvswitch (1.4.2+git20120612-4ubuntu1) quantal; urgency=low

  * Merge from Debian unstable.  Remaining changes:
    - d/control: Disable openvswitch-datapath-dkms package.
    - d/patches/kernel_3.5_support.patch: Fix openvswitch-switch startup
      with 3.5 kernel module name, allowing use of openvswitch without
      openvswitch-datapath-dkms.

 -- James Page <james.page@ubuntu.com>  Thu, 19 Jul 2012 08:51:47 +0100

openvswitch (1.4.2+git20120612-4) unstable; urgency=low

  * debian/openvswitch-switch.init: Do not modify iptables rules.  Closes:
    #680537.  Thanks to Bastian Blank <waldi@debian.org> for reporting
    this bug.

 -- Ben Pfaff <pfaffben@debian.org>  Mon, 16 Jul 2012 12:56:37 -0700

openvswitch (1.4.2+git20120612-3ubuntu1) quantal; urgency=low

  * Merge from Debian unstable.  Remaining changes:
    - d/control: Disable openvswitch-datapath-dkms package.
    - d/patches/kernel_3.5_support.patch: Fix openvswitch-switch startup
      with 3.5 kernel module name, allowing use of openvswitch without
      openvswitch-datapath-dkms.

 -- James Page <james.page@ubuntu.com>  Mon, 16 Jul 2012 14:48:43 +0100

openvswitch (1.4.2+git20120612-3) unstable; urgency=low

  * debian/control: Add "netbase" dependency to ensure that /etc/protocols
    is available.  Closes: #680537.  Thanks to Bastian Blank <waldi@debian.org>
    for reporting this bug.

 -- Ben Pfaff <pfaffben@debian.org>  Mon, 09 Jul 2012 09:50:03 -0700

openvswitch (1.4.2+git20120612-2ubuntu2) quantal; urgency=low

  * Disable openvswitch-datapath-dkms package (LP: #1018265); it's not
    compatible with the 3.5 kernel (which provides the openvswitch module)
    and if users really required the brcompat module and are using an older
    kernel then they can use openvswitch-datapath-source.

 -- James Page <james.page@ubuntu.com>  Wed, 11 Jul 2012 13:00:58 +0100

openvswitch (1.4.2+git20120612-2ubuntu1) quantal; urgency=low

  * Fix openvswitch-switch startup with 3.5 kernel module name, allowing
    use of openvswitch without openvswitch-datapath-dkms (LP: #1021078):
    - d/patches/kernel_3.5_support.patch: Cherry picked patch from upstream
      VCS to align module naming with openvswitch module in 3.5 kernel.

 -- James Page <james.page@ubuntu.com>  Mon, 09 Jul 2012 22:01:41 +0100

openvswitch (1.4.2+git20120612-2) unstable; urgency=low

  * Apply upstream commit that enables DKMS to automatically build for the
    running kernel, which seems to be common practice in DMS packaging
    (launchpad bug #962189)

 -- Ben Pfaff <pfaffben@debian.org>  Tue, 19 Jun 2012 09:40:53 -0700

openvswitch (1.4.2+git20120612-1) unstable; urgency=low

  * New upstream version fixing the following bugs:
    o Crash fixes:
      - ofproto: Fix use after free in ofoperation_complete().
      - odp-util: Update ODPUTIL_FLOW_KEY_BYTES for current kernel flow format.
      - datapath: Check correct return value from skb_gso_segment().
    o Possible serious malfunctions:
      - dpif-netdev: allow for proper destruction of netdev datapaths.
      - datapath: Validation of IPv6 set port action uses IPv4 header.
    o Rare annoying corner case:
      - odp-util: Fix parsing of actions encapsulated within "sample" actions.
    o Bugs with unknown impact:
      - Correctly set destination MAC in mf_set_flow_value().
    o OpenFlow controller compatibility:
      - Allow OFPP_CONTROLLER as the in_port for packet-out messages.

 -- Ben Pfaff <pfaffben@debian.org>  Tue, 12 Jun 2012 10:25:08 -0700

openvswitch (1.4.0+git20120426-1) unstable; urgency=low

  * New upstream release fixing the following bugs:
    o Broken log rotation.
    o Use-after-free error when ports disappear.
    o Minor memory leaks.
    o Testsuite failures on big-endian architectures.

 -- Ben Pfaff <pfaffben@debian.org>  Thu, 26 Apr 2012 13:46:55 -0700

openvswitch (1.4.0+git20120321-1) unstable; urgency=low

  * New upstream version including:
    o Features:
      - ovs-vsctl: Allow "fake bridges" to be created for VLAN 0.
      - vswitchd: Make the MAC entry aging time configurable.
      - mac-learning: Increase MAC learning timeout to 300 seconds.
    o Bug fixes:
      - netdev-linux: Fix use-after-free when netdev_dump_queues() deletes
        queues.
      - netlink-socket: Increase Netlink socket receive buffer size.
      - ofproto: Fix code that keeps track of MTU.
      - ovs-monitor-ipsec: Detect correctly IPSEC configuration changes
      - bond: Incorrectly reported an error in appctl.
      - socket-util: Unlink Unix domain sockets that bind but fail to connect.
      - bridge: Remove unwanted ports at time of ofproto creation.
      - dpif-linux: Make dpif_linux_port_query_by_name() query only one
        datapath.
      - ofproto-dpif: Cleanup STP on ports when disabled on their bridge.
      - configure: Try to extract kernel source directory from build Makefile.
      - vswitchd: Always configure a default queue for QoS.
      - ofproto-dpif: Don't output to in_port even if in_port is OFPP_LOCAL.
      - sflow_agent: Use snprintf() in place of sprintf().
    o Packaging:
      - Move PKI directory to FHS-compliant location.  Closes: #661090.
        Thanks to Andreas Beckmann <debian@abeckmann.de> for reporting
        this bug.
      - Use a different way to avoid failing install without kernel module.
      - Avoid unit test failure when doing "unofficial" builds.
      - Bump standards-version to 3.9.3.
      - Remove some useless files from the dkms package.
      - Clean .pyc files in "clean" target.
      - Remove po-debconf build dependency.
      - Build-depend on python-all to pull in all Python versions.
      - Add missing ${python:Depends} to openvswitch-test package.
      - Improve long descriptions so as to better describe the packages.
      - Bump debhelper compat level to 8 and make build-depends consistent.
      - Fix exit status of openvswitch-switch init script "status" command.
      - Use provided kernel source dir instead of host kernel version.
      - Do not run "make" if "configure" fails during DKMS build.
      - Look in /lib/modules instead of /usr/src for DKMS kernel sources.
      - Fix dependencies for openvswitch-datapath-dkms package.
      - Don't install Python modules for obsolete Python versions.
      - Add dependency on ${misc:Depends} to openvswitch-test
    o Documentation improvements:
      - ovsdb-doc: Use minus sign in negative numbers in nroff output.
      - ovsdb-doc: Convert '-' preceding a number as a minus sign, not a
        hyphen.
      - ovsdb-doc: Put NAME section into generated manpage.
      - Fix typo in manpage.
      - vswitchd: Document behavior of 802.1p priorities with VLAN splinters.
      - netdev: Fix typo in error message.
      - INSTALL.Linux: minor typo

  * Many thanks to Thomas Goirand <zigo@debian.org> for contributing many
    of the packaging fixes listed above.

  * This version fixes most of the lintian errors described in bug
    #663051, but a few remain, so this upload does not close that bug.  I
    believe that this upload should be suitable for downgrading that bug's
    severity.

 -- Ben Pfaff <pfaffben@debian.org>  Wed, 21 Mar 2012 10:00:28 -0700

openvswitch (1.4.0-2+nmu1) unstable; urgency=low

  * Non maintainer upload.
  * Removes all patches in debian/patches, because they are patching stuff
  inconditionally in debian/*, and this should be applied by default.
  * Uses the correct ${kernel_source_dir} in debian/dkms.conf.in, so that
  the kernel module builds as expected (Closes: #659685).

 -- Thomas Goirand <zigo@debian.org>  Thu, 08 Mar 2012 08:46:24 +0000

openvswitch (1.4.0-2) unstable; urgency=low

  * Use explicit DKMS variable for kernel source directory
    - 0001-debian-Fix-dependencies-for-openvswitch-datapath-dkm.patch
    - 0002-debian-Look-in-lib-modules-instead-of-usr-src-for-DK.patch
    - 0001-debian-Use-provided-kernel-source-dir.patch
    - 0001-debian-Do-not-run-make-if-configure-fails-during-DKM.patch
    - (closes: #659685)
  * Don't install Python modules for obsolete Python versions
    - 0001-debian-Don-t-install-Python-modules-for-obsolete-Pyt.patch

 -- Simon Horman <horms@debian.org>  Tue, 14 Feb 2012 11:43:13 +0900

openvswitch (1.4.0-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - Compatible with Open vSwitch kernel module included in Linux 3.3.
    - New "VLAN splinters" feature to work around buggy device drivers
      in old Linux versions.  (This feature is deprecated.  When
      broken device drivers are no longer in widespread use, we will
      delete this feature.)  See ovs-vswitchd.conf.db(5) for more
      information.
    - OpenFlow:
       - Added ability to match on IPv6 flow label through NXM.
       - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
       - Added ability to match on TTL in IPv4 and IPv6 through NXM.
       - Added ability to modify ECN bits in IPv4.
       - Added ability to modify TTL in IPv4.
    - ovs-vswitchd:
       - Don't require the "normal" action to use mirrors.  Traffic will
         now be properly mirrored for any flows, regardless of their
         actions.
       - Track packet and byte statistics sent on mirrors.
    - ovs-appctl:
      - New "fdb/flush" command to flush bridge's MAC learning table.
    - ovs-test:
      - A new distributed testing tool that allows one to diagnose performance
        and connectivity issues. This tool currently is not included in RH or
        Xen packages.
    - RHEL packaging now supports integration with Red Hat network scripts.
    - Debian: Depend on python (>= 2.7) | python-argparse instead of
              python-argparse to avoid pulling in python2.6
              (closes: #653645)

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 30 Jan 2012 23:36:00 +0000

openvswitch (1.3.0-1) unstable; urgency=low
  [ Open vSwitch team ]
  * New upstream version
    - OpenFlow:
      - Added an OpenFlow extension which allows the "output" action to accept
        NXM fields.
      - Added an OpenFlow extension for flexible learning.
      - Bumped number of NXM registers from four to five.
    - ovs-appctl:
      - New "version" command to determine version of running daemon.
      - If no argument is provided for "cfm/show", displays detailed
        information about all interfaces with CFM enabled.
      - If no argument is provided for "lacp/show", displays detailed
        information about all ports with LACP enabled.
    - ovs-vswitchd:
      - The software switch now supports 255 OpenFlow tables, instead
        of just one.  By default, only table 0 is consulted, but the
        new NXAST_RESUBMIT_TABLE action can look up in additional
        tables.  Tables 128 and above are reserved for use by the
        switch itself; please use only tables 0 through 127.
      - Add support for 802.1D spanning tree (STP).
    - Fragment handling extensions:
      - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
        fields are made available for matching in fragments with
        offset 0.
      - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
        via "ip_frag" in ovs-ofctl).
      - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
        fragment handling policy.
    - CAPWAP tunneling now supports an extension to transport a 64-key.  By
      default it remains compatible with the old version and other
      standards-based implementations.
    - Flow setups are now processed in a round-robin manner across ports
      to prevent any single client from monopolizing the CPU and conducting
      a denial of service attack.
    - Added support for native VLAN tagging.  A new "vlan_mode"
      parameter can be set for "port". Possible values: "access",
      "trunk", "native-tagged" and "native-untagged".
    - test-openflowd has been removed.  Please use ovs-vswitchd instead.

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 09 Dec 2011 23:36:00 +0000

openvswitch (1.2.0-1) unstable; urgency=low

  [ Open vSwitch team ]
  * New upstream version
    - New "ofproto" abstraction layer to ease porting to hardware
      switching ASICs.
    - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
    - Datapath support for Linux kernels up to 3.0.
    - OpenFlow:
      - New "bundle" and "bundle_load" action extensions.
    - Database:
      - Implement table unique constraints.
      - Support cooperative locking between callers.
    - ovs-dpctl:
      - New "-s" option for "show" command prints packet and byte
        counters for each port.
    - ovs-ofctl:
      - New "--readd" option for "replace-flows".
    - ovs-vsctl:
      - New "show" command to print an overview of configuration.
      - New "comment" command to add remark that explains intentions.
    - ovs-brcompatd has been rewritten to fix long-standing bugs.
    - ovs-openflowd has been renamed test-openflowd and moved into the
      tests directory.  Its presence confused too many users.  Please
      use ovs-vswitchd instead.
    - New ovs-benchmark utility to test flow setup performance.
    - A new log level "off" has been added.  Configuring a log facility
      "off" prevents any messages from being logged to it.  Previously,
      "emer" was effectively "off" because no messages were ever logged at
      level "emer".  Now, errors that cause a process to exit are logged
      at "emer" level.
    - "configure" option --with-l26 has been renamed --with-linux, and
      --with-l26-source has been renamed --with-linux-source.  The old
      names will be removed after the next release, so please update
      your scripts.
    - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
      datapath/linux-2.6/compat-2.6 directories.
    - Feature removals:
      - Dropped support for "tun_id_from_cookie" OpenFlow extension.
        Please use the extensible match extensions instead.
      - Removed the Maintenance_Point and Monitor tables in an effort
        to simplify 802.1ag configuration.
    - Performance and scalability improvements
    - Bug fixes

 -- Open vSwitch team <dev@openvswitch.org>  Wed, 03 Aug 2011 14:43:00 +0000

openvswitch (1.1.1-1) unstable; urgency=low

  [ Open vSwitch team ]
  * Bug fixes.

  [ Simon Horman ]
  * docs: Suppress warning marcro DD not defined
    (upstream commit 58f870d0)
  * debian: Make openvswitch depend on Python
    (upstream commit aa41cb61)
  * debian: Don't begin openvswitch-pki description with article.
    (upstream commit bc6bb66)
  * Debian: Add ${misc:Depends} dependency to python-openvswitch
  * Debian: Update standards version from 3.9.1 to 3.9.2
  * Debian: ${source:Version} dependency on python openvswitch
  * Debian: ${source:Version} dependency for python openvswitch
  * Switch to dpkg-source 3.0 (quilt) format
    - For local non-debian/ patches (above)

 -- Simon Horman <horms@debian.org>  Wed, 15 Jun 2011 10:46:15 +0900
    
openvswitch (1.1.0-1) unstable; urgency=low

  [ Open vSwitch team ]
  * New upstream version
    - Ability to define policies over IPv6
    - LACP
    - 802.1ag CCM
    - Support for extensible match extensions to OpenFlow
    - QoS:
      - Support for HFSC qdisc.
      - Queue used by in-band control can now be configured.
    - Kernel:
      - Kernel<->userspace interface has been reworked and should be
        close to a stable ABI now.
      - "Port group" concept has been dropped.
    - GRE over IPSEC tunnels
    - Bonding:
      - New active backup bonding mode.
      - New L4 hashing support when LACP is enabled.
      - Source MAC hash now includes VLAN field also.
      - miimon support.
    - Greatly improved handling of large flow tables
    - ovs-dpctl:
      - "show" command now prints full vport configuration.
      - "dump-groups" command removed since kernel support for
        port groups was dropped.
    - ovs-vsctl:
      - New commands for working with the new Managers table.
      - "list" command enhanced with new formatting options and --columns
        option.
      - "get" command now accepts new --id option.
      - New "find" command.
    - ovs-ofctl:
      - New "queue-stats" command for printing queue stats.
      - New commands "replace-flows" and "diff-flows".
      - Commands to add and remove flows can now read from files.
      - New --flow-format option to enable or disable NXM.
      - New --more option to increase OpenFlow message verbosity.
      - Removed "tun-cookie" command, which is no longer useful.
    - ovs-controller enhancements for testing various features.
    - New ovs-vlan-test command for testing for Linux kernel driver VLAN
      bugs.  New ovs-vlan-bug-workaround command for enabling and
      disabling a workaround for these driver bugs.
    - OpenFlow support:
      - "Resubmit" actions now update flow statistics. 
      - New "register" extension for use in matching and actions, via NXM.
      - New "multipath" experimental action extension.
      - New support for matching multicast Ethernet frames, via NXM.
      - New extension for OpenFlow vendor error codes.
      - New extension to set the QoS output queue without actually
        sending to an output port.
      - Open vSwitch now reports a single flow table, instead of
        separate hash and wildcard tables.  This better models the
        current implementation.
      - New experimental "note" action.
      - New "ofproto/trace" ovs-appctl command and associated utilities
        to ease debugging complex flow tables.
    - Database:
      - Schema documentation now includes an entity-relationship diagram.
      - The database is now garbage collected.  In most tables,
        unreferenced rows will be deleted automatically.
      - Many tables now include statistics updated periodically by
        ovs-vswitchd or ovsdb-server.
      - Every table now has an "external-ids" column for use by OVS
        integrators.
      - There is no default controller anymore.  Each bridge must have its
        controller individually specified.
      - The "fail-mode" is now a property of a Bridge instead of a Controller.
      - New versioning and checksum features.
      - New Managers table and manager_options column in Open_vSwitch table
        for specifying managers.  The old "managers" column in the
        Open_vSwitch table has been removed.
      - Many "name" columns are now immutable.
    - Feature removals:
      - Dropped support for XenServer pre-5.6.100.
      - Dropped support for Linux pre-2.6.18.
      - Dropped controller discovery support.
      - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
        Statistics reporting in the database is a rough equivalent.
      - Dropped the "corekeeper" package (now separate, at
        http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
    - Performance and scalability improvements
    - Bug fixes

  [ Simon Horman ]
  * Add the following fixes from upstream branch-1.1
    - 7f1aca9 dpif-linux: Avoid logging error on ENOENT in
              dpif_linux_is_internal_device().
    - 8996f83 dpif-linux: Avoid segfault on netdev_get_stats() without kernel
              module.
    - 002d4a3 vswitch: Improve schema documentation.
    - 58bd294 cfm: Fix broken fault logic.
    - c042664 bridge: Run once before configuring CFM.
   * Switch to dpkg-source 3.0 (quilt) format

 -- Simon Horman <horms@debian.org>  Wed, 27 Apr 2011 17:11:10 +0900

openvswitch (1.1.0~pre2.g2.ea763e0e-1) unstable; urgency=low

  * Git snapshot, including
    - tests: Fix Y2011 bug in testsuite
      (closes: #609506)

 -- Simon Horman <horms@debian.org>  Wed, 12 Jan 2011 08:34:35 +0900

openvswitch (1.1.0~pre2.g1.bbe8d06e-1) unstable; urgency=low

  * Git snaptshot

 -- Simon Horman <horms@debian.org>  Thu, 06 Jan 2011 11:11:55 +0900

openvswitch (1.1.0~pre2-5) unstable; urgency=low

  * Open vSwitch only works on Linux so set
    the Architecture of binary packages to linux-any accordingly

 -- Simon Horman <horms@debian.org>  Tue, 23 Nov 2010 07:55:19 +0900

openvswitch (1.1.0~pre2-4) unstable; urgency=low

  * Add procps to Build-Depends
    (closes: #602891)

 -- Simon Horman <horms@debian.org>  Tue, 16 Nov 2010 06:46:17 +0900

openvswitch (1.1.0~pre2-3) unstable; urgency=low

  * Remove the corekeeper package as it isn't strongly related
    to Open vSwitch. It has subsequently been broken off into
    a separate source repository and may be uploaded as its
    own debian source package.
    http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper;a=summary
    (closes: #602946)
  * Avoid the use of long socket names.
    (closes: #602891, closes: #602911)

 -- Simon Horman <horms@debian.org>  Thu, 11 Nov 2010 06:35:05 +0900

openvswitch (1.1.0~pre2-2) unstable; urgency=low

  * Clarify licensing of files in xenserver/

 -- Simon Horman <horms@debian.org>  Thu, 23 Sep 2010 10:56:18 +0900

openvswitch (1.1.0~pre2-1) unstable; urgency=low

  * New upstream version
    - Bug fixes

 -- Simon Horman <horms@debian.org>  Wed, 15 Sep 2010 18:28:59 +0900

openvswitch (1.1.0~pre1-1) unstable; urgency=low

  * New upstream version
    - OpenFlow 1.0 slicing (QoS) functionality
    - Python bindings for configuration database (no write support)
    - Performance and scalability improvements
    - Bug fixes

 -- Open vSwitch team <dev@openvswitch.org>  Tue, 31 Aug 2010 23:20:00 +0000

openvswitch (1.0.1-1) unstable; urgency=low

  * New upstream version.

 -- Open vSwitch team <dev@openvswitch.org>  Mon, 17 May 2010 10:36:00 +0000

