/*---------------------------------------------------------------------------------------------
 *  Copyright (c) Microsoft Corporation. All rights reserved.
 *  Licensed under the MIT License. See License.txt in the project root for license information.
 *--------------------------------------------------------------------------------------------*/

/** Declaration module describing the VS Code debug protocol.
	Auto-generated from json schema. Do not edit manually.
*/
export declare module DebugProtocol {

	/** Base class of requests, responses, and events. */
	interface ProtocolMessage {
		/** Sequence number of the message (also known as message ID). The `seq` for the first message sent by a client or debug adapter is 1, and for each subsequent message is 1 greater than the previous message sent by that actor. `seq` can be used to order requests, responses, and events, and to associate requests with their corresponding responses. For protocol messages of type `request` the sequence number can be used to cancel the request. */
		seq: number;
		/** Message type.
			Values: 'request', 'response', 'event', etc.
		*/
		type: 'request' | 'response' | 'event' | string;
	}

	/** A client or debug adapter initiated request. */
	interface Request extends ProtocolMessage {
		// type: 'request';
		/** The command to execute. */
		command: string;
		/** Object containing arguments for the command. */
		arguments?: any;
	}

	/** A debug adapter initiated event. */
	interface Event extends ProtocolMessage {
		// type: 'event';
		/** Type of event. */
		event: string;
		/** Event-specific information. */
		body?: any;
	}

	/** Response for a request. */
	interface Response extends ProtocolMessage {
		// type: 'response';
		/** Sequence number of the corresponding request. */
		request_seq: number;
		/** Outcome of the request.
			If true, the request was successful and the `body` attribute may contain the result of the request.
			If the value is false, the attribute `message` contains the error in short form and the `body` may contain additional information (see `ErrorResponse.body.error`).
		*/
		success: boolean;
		/** The command requested. */
		command: string;
		/** Contains the raw error in short form if `success` is false.
			This raw error might be interpreted by the client and is not shown in the UI.
			Some predefined values exist.
			Values: 
			'cancelled': request was cancelled.
			etc.
		*/
		message?: 'cancelled' | string;
		/** Contains request result if success is true and error details if success is false. */
		body?: any;
	}

	/** On error (whenever `success` is false), the body can provide more details. */
	interface ErrorResponse extends Response {
		body: {
			/** A structured error message. */
			error?: Message;
		};
	}

	/** Cancel request; value of command field is 'cancel'.
		The `cancel` request is used by the client in two situations:
		- to indicate that it is no longer interested in the result produced by a specific request issued earlier
		- to cancel a progress sequence. Clients should only call this request if the corresponding capability `supportsCancelRequest` is true.
		This request has a hint characteristic: a debug adapter can only be expected to make a 'best effort' in honouring this request but there are no guarantees.
		The `cancel` request may return an error if it could not cancel an operation but a client should refrain from presenting this error to end users.
		The request that got cancelled still needs to send a response back. This can either be a normal result (`success` attribute true) or an error response (`success` attribute false and the `message` set to `cancelled`).
		Returning partial results from a cancelled request is possible but please note that a client has no generic way for detecting that a response is partial or not.
		The progress that got cancelled still needs to send a `progressEnd` event back.
		 A client should not assume that progress just got cancelled after sending the `cancel` request.
	*/
	interface CancelRequest extends Request {
		// command: 'cancel';
		arguments?: CancelArguments;
	}

	/** Arguments for `cancel` request. */
	interface CancelArguments {
		/** The ID (attribute `seq`) of the request to cancel. If missing no request is cancelled.
			Both a `requestId` and a `progressId` can be specified in one request.
		*/
		requestId?: number;
		/** The ID (attribute `progressId`) of the progress to cancel. If missing no progress is cancelled.
			Both a `requestId` and a `progressId` can be specified in one request.
		*/
		progressId?: string;
	}

	/** Response to `cancel` request. This is just an acknowledgement, so no body field is required. */
	interface CancelResponse extends Response {
	}

	/** Event message for 'initialized' event type.
		This event indicates that the debug adapter is ready to accept configuration requests (e.g. SetBreakpointsRequest, SetExceptionBreakpointsRequest).
		A debug adapter is expected to send this event when it is ready to accept configuration requests (but not before the `initialize` request has finished).
		The sequence of events/requests is as follows:
		- adapters sends `initialized` event (after the `initialize` request has returned)
		- client sends zero or more `setBreakpoints` requests
		- client sends one `setFunctionBreakpoints` request (if corresponding capability `supportsFunctionBreakpoints` is true)
		- client sends a `setExceptionBreakpoints` request if one or more `exceptionBreakpointFilters` have been defined (or if `supportsConfigurationDoneRequest` is not true)
		- client sends other future configuration requests
		- client sends one `configurationDone` request to indicate the end of the configuration.
	*/
	interface InitializedEvent extends Event {
		// event: 'initialized';
	}

	/** Event message for 'stopped' event type.
		The event indicates that the execution of the debuggee has stopped due to some condition.
		This can be caused by a break point previously set, a stepping request has completed, by executing a debugger statement etc.
	*/
	interface StoppedEvent extends Event {
		// event: 'stopped';
		body: {
			/** The reason for the event.
				For backward compatibility this string is shown in the UI if the `description` attribute is missing (but it must not be translated).
				Values: 'step', 'breakpoint', 'exception', 'pause', 'entry', 'goto', 'function breakpoint', 'data breakpoint', 'instruction breakpoint', etc.
			*/
			reason: 'step' | 'breakpoint' | 'exception' | 'pause' | 'entry' | 'goto' | 'function breakpoint' | 'data breakpoint' | 'instruction breakpoint' | string;
			/** The full reason for the event, e.g. 'Paused on exception'. This string is shown in the UI as is and can be translated. */
			description?: string;
			/** The thread which was stopped. */
			threadId?: number;
			/** A value of true hints to the client that this event should not change the focus. */
			preserveFocusHint?: boolean;
			/** Additional information. E.g. if reason is `exception`, text contains the exception name. This string is shown in the UI. */
			text?: string;
			/** If `allThreadsStopped` is true, a debug adapter can announce that all threads have stopped.
				- The client should use this information to enable that all threads can be expanded to access their stacktraces.
				- If the attribute is missing or false, only the thread with the given threadId can be expanded.
			*/
			allThreadsStopped?: boolean;
			/** Ids of the breakpoints that triggered the event. In most cases there is only a single breakpoint but here are some examples for multiple breakpoints:
				- Different types of breakpoints map to the same location.
				- Multiple source breakpoints get collapsed to the same instruction by the compiler/runtime.
				- Multiple function breakpoints with different function names map to the same location.
			*/
			hitBreakpointIds?: number[];
		};
	}

	/** Event message for 'continued' event type.
		The event indicates that the execution of the debuggee has continued.
		Please note: a debug adapter is not expected to send this event in response to a request that implies that execution continues, e.g. `launch` or `continue`.
		It is only necessary to send a `continued` event if there was no previous request that implied this.
	*/
	interface ContinuedEvent extends Event {
		// event: 'continued';
		body: {
			/** The thread which was continued. */
			threadId: number;
			/** If `allThreadsContinued` is true, a debug adapter can announce that all threads have continued. */
			allThreadsContinued?: boolean;
		};
	}

	/** Event message for 'exited' event type.
		The event indicates that the debuggee has exited and returns its exit code.
	*/
	interface ExitedEvent extends Event {
		// event: 'exited';
		body: {
			/** The exit code returned from the debuggee. */
			exitCode: number;
		};
	}

	/** Event message for 'terminated' event type.
		The event indicates that debugging of the debuggee has terminated. This does **not** mean that the debuggee itself has exited.
	*/
	interface TerminatedEvent extends Event {
		// event: 'terminated';
		body?: {
			/** A debug adapter may set `restart` to true (or to an arbitrary object) to request that the front end restarts the session.
				The value is not interpreted by the client and passed unmodified as an attribute `__restart` to the `launch` and `attach` requests.
			*/
			restart?: any;
		};
	}

	/** Event message for 'thread' event type.
		The event indicates that a thread has started or exited.
	*/
	interface ThreadEvent extends Event {
		// event: 'thread';
		body: {
			/** The reason for the event.
				Values: 'started', 'exited', etc.
			*/
			reason: 'started' | 'exited' | string;
			/** The identifier of the thread. */
			threadId: number;
		};
	}

	/** Event message for 'output' event type.
		The event indicates that the target has produced some output.
	*/
	interface OutputEvent extends Event {
		// event: 'output';
		body: {
			/** The output category. If not specified or if the category is not understood by the client, `console` is assumed.
				Values: 
				'console': Show the output in the client's default message UI, e.g. a 'debug console'. This category should only be used for informational output from the debugger (as opposed to the debuggee).
				'important': A hint for the client to show the output in the client's UI for important and highly visible information, e.g. as a popup notification. This category should only be used for important messages from the debugger (as opposed to the debuggee). Since this category value is a hint, clients might ignore the hint and assume the `console` category.
				'stdout': Show the output as normal program output from the debuggee.
				'stderr': Show the output as error program output from the debuggee.
				'telemetry': Send the output to telemetry instead of showing it to the user.
				etc.
			*/
			category?: 'console' | 'important' | 'stdout' | 'stderr' | 'telemetry' | string;
			/** The output to report. */
			output: string;
			/** Support for keeping an output log organized by grouping related messages.
				'start': Start a new group in expanded mode. Subsequent output events are members of the group and should be shown indented.
				The `output` attribute becomes the name of the group and is not indented.
				'startCollapsed': Start a new group in collapsed mode. Subsequent output events are members of the group and should be shown indented (as soon as the group is expanded).
				The `output` attribute becomes the name of the group and is not indented.
				'end': End the current group and decrease the indentation of subsequent output events.
				A nonempty `output` attribute is shown as the unindented end of the group.
			*/
			group?: 'start' | 'startCollapsed' | 'end';
			/** If an attribute `variablesReference` exists and its value is > 0, the output contains objects which can be retrieved by passing `variablesReference` to the `variables` request. The value should be less than or equal to 2147483647 (2^31-1). */
			variablesReference?: number;
			/** The source location where the output was produced. */
			source?: Source;
			/** The source location's line where the output was produced. */
			line?: number;
			/** The source location's column where the output was produced. */
			column?: number;
			/** Additional data to report. For the `telemetry` category the data is sent to telemetry, for the other categories the data is shown in JSON format. */
			data?: any;
		};
	}

	/** Event message for 'breakpoint' event type.
		The event indicates that some information about a breakpoint has changed.
	*/
	interface BreakpointEvent extends Event {
		// event: 'breakpoint';
		body: {
			/** The reason for the event.
				Values: 'changed', 'new', 'removed', etc.
			*/
			reason: 'changed' | 'new' | 'removed' | string;
			/** The `id` attribute is used to find the target breakpoint, the other attributes are used as the new values. */
			breakpoint: Breakpoint;
		};
	}

	/** Event message for 'module' event type.
		The event indicates that some information about a module has changed.
	*/
	interface ModuleEvent extends Event {
		// event: 'module';
		body: {
			/** The reason for the event. */
			reason: 'new' | 'changed' | 'removed';
			/** The new, changed, or removed module. In case of `removed` only the module id is used. */
			module: Module;
		};
	}

	/** Event message for 'loadedSource' event type.
		The event indicates that some source has been added, changed, or removed from the set of all loaded sources.
	*/
	interface LoadedSourceEvent extends Event {
		// event: 'loadedSource';
		body: {
			/** The reason for the event. */
			reason: 'new' | 'changed' | 'removed';
			/** The new, changed, or removed source. */
			source: Source;
		};
	}

	/** Event message for 'process' event type.
		The event indicates that the debugger has begun debugging a new process. Either one that it has launched, or one that it has attached to.
	*/
	interface ProcessEvent extends Event {
		// event: 'process';
		body: {
			/** The logical name of the process. This is usually the full path to process's executable file. Example: /home/example/myproj/program.js. */
			name: string;
			/** The system process id of the debugged process. This property is missing for non-system processes. */
			systemProcessId?: number;
			/** If true, the process is running on the same computer as the debug adapter. */
			isLocalProcess?: boolean;
			/** Describes how the debug engine started debugging this process.
				'launch': Process was launched under the debugger.
				'attach': Debugger attached to an existing process.
				'attachForSuspendedLaunch': A project launcher component has launched a new process in a suspended state and then asked the debugger to attach.
			*/
			startMethod?: 'launch' | 'attach' | 'attachForSuspendedLaunch';
			/** The size of a pointer or address for this process, in bits. This value may be used by clients when formatting addresses for display. */
			pointerSize?: number;
		};
	}

	/** Event message for 'capabilities' event type.
		The event indicates that one or more capabilities have changed.
		Since the capabilities are dependent on the client and its UI, it might not be possible to change that at random times (or too late).
		Consequently this event has a hint characteristic: a client can only be expected to make a 'best effort' in honouring individual capabilities but there are no guarantees.
		Only changed capabilities need to be included, all other capabilities keep their values.
	*/
	interface CapabilitiesEvent extends Event {
		// event: 'capabilities';
		body: {
			/** The set of updated capabilities. */
			capabilities: Capabilities;
		};
	}

	/** Event message for 'progressStart' event type.
		The event signals that a long running operation is about to start and provides additional information for the client to set up a corresponding progress and cancellation UI.
		The client is free to delay the showing of the UI in order to reduce flicker.
		This event should only be sent if the corresponding capability `supportsProgressReporting` is true
	*/
	interface ProgressStartEvent extends Event {
		// event: 'progressStart';
		body: {
			/** An ID that can be used in subsequent `progressUpdate` and `progressEnd` events to make them refer to the same progress reporting.
				IDs must be unique within a debug session.
			*/
			progressId: string;
			/** Short title of the progress reporting. Shown in the UI to describe the long running operation. */
			title: string;
			/** The request ID that this progress report is related to. If specified a debug adapter is expected to emit progress events for the long running request until the request has been either completed or cancelled.
				If the request ID is omitted, the progress report is assumed to be related to some general activity of the debug adapter.
			*/
			requestId?: number;
			/** If true, the request that reports progress may be cancelled with a `cancel` request.
				So this property basically controls whether the client should use UX that supports cancellation.
				Clients that don't support cancellation are allowed to ignore the setting.
			*/
			cancellable?: boolean;
			/** More detailed progress message. */
			message?: string;
			/** Progress percentage to display (value range: 0 to 100). If omitted no percentage is shown. */
			percentage?: number;
		};
	}

	/** Event message for 'progressUpdate' event type.
		The event signals that the progress reporting needs to be updated with a new message and/or percentage.
		The client does not have to update the UI immediately, but the clients needs to keep track of the message and/or percentage values.
		This event should only be sent if the corresponding capability `supportsProgressReporting` is true.
	*/
	interface ProgressUpdateEvent extends Event {
		// event: 'progressUpdate';
		body: {
			/** The ID that was introduced in the initial `progressStart` event. */
			progressId: string;
			/** More detailed progress message. If omitted, the previous message (if any) is used. */
			message?: string;
			/** Progress percentage to display (value range: 0 to 100). If omitted no percentage is shown. */
			percentage?: number;
		};
	}

	/** Event message for 'progressEnd' event type.
		The event signals the end of the progress reporting with a final message.
		This event should only be sent if the corresponding capability `supportsProgressReporting` is true.
	*/
	interface ProgressEndEvent extends Event {
		// event: 'progressEnd';
		body: {
			/** The ID that was introduced in the initial `ProgressStartEvent`. */
			progressId: string;
			/** More detailed progress message. If omitted, the previous message (if any) is used. */
			message?: string;
		};
	}

	/** Event message for 'invalidated' event type.
		This event signals that some state in the debug adapter has changed and requires that the client needs to re-render the data snapshot previously requested.
		Debug adapters do not have to emit this event for runtime changes like stopped or thread events because in that case the client refetches the new state anyway. But the event can be used for example to refresh the UI after rendering formatting has changed in the debug adapter.
		This event should only be sent if the corresponding capability `supportsInvalidatedEvent` is true.
	*/
	interface InvalidatedEvent extends Event {
		// event: 'invalidated';
		body: {
			/** Set of logical areas that got invalidated. This property has a hint characteristic: a client can only be expected to make a 'best effort' in honouring the areas but there are no guarantees. If this property is missing, empty, or if values are not understood, the client should assume a single value `all`. */
			areas?: InvalidatedAreas[];
			/** If specified, the client only needs to refetch data related to this thread. */
			threadId?: number;
			/** If specified, the client only needs to refetch data related to this stack frame (and the `threadId` is ignored). */
			stackFrameId?: number;
		};
	}

	/** Event message for 'memory' event type.
		This event indicates that some memory range has been updated. It should only be sent if the corresponding capability `supportsMemoryEvent` is true.
		Clients typically react to the event by re-issuing a `readMemory` request if they show the memory identified by the `memoryReference` and if the updated memory range overlaps the displayed range. Clients should not make assumptions how individual memory references relate to each other, so they should not assume that they are part of a single continuous address range and might overlap.
		Debug adapters can use this event to indicate that the contents of a memory range has changed due to some other request like `setVariable` or `setExpression`. Debug adapters are not expected to emit this event for each and every memory change of a running program, because that information is typically not available from debuggers and it would flood clients with too many events.
	*/
	interface MemoryEvent extends Event {
		// event: 'memory';
		body: {
			/** Memory reference of a memory range that has been updated. */
			memoryReference: string;
			/** Starting offset in bytes where memory has been updated. Can be negative. */
			offset: number;
			/** Number of bytes updated. */
			count: number;
		};
	}

	/** RunInTerminal request; value of command field is 'runInTerminal'.
		This request is sent from the debug adapter to the client to run a command in a terminal.
		This is typically used to launch the debuggee in a terminal provided by the client.
		This request should only be called if the corresponding capability `supportsRunInTerminalRequest` is true.
		Client implementations of `runInTerminal` are free to run the command however they choose including issuing the command to a command line interpreter (aka 'shell'). Argument strings passed to the `runInTerminal` request must arrive verbatim in the command to be run. As a consequence, clients which use a shell are responsible for escaping any special shell characters in the argument strings to prevent them from being interpreted (and modified) by the shell.
		Some users may wish to take advantage of shell processing in the argument strings. For clients which implement `runInTerminal` using an intermediary shell, the `argsCanBeInterpretedByShell` property can be set to true. In this case the client is requested not to escape any special shell characters in the argument strings.
	*/
	interface RunInTerminalRequest extends Request {
		// command: 'runInTerminal';
		arguments: RunInTerminalRequestArguments;
	}

	/** Arguments for `runInTerminal` request. */
	interface RunInTerminalRequestArguments {
		/** What kind of terminal to launch. */
		kind?: 'integrated' | 'external';
		/** Title of the terminal. */
		title?: string;
		/** Working directory for the command. For non-empty, valid paths this typically results in execution of a change directory command. */
		cwd: string;
		/** List of arguments. The first argument is the command to run. */
		args: string[];
		/** Environment key-value pairs that are added to or removed from the default environment. */
		env?: { [key: string]: string | null; };
		/** This property should only be set if the corresponding capability `supportsArgsCanBeInterpretedByShell` is true. If the client uses an intermediary shell to launch the application, then the client must not attempt to escape characters with special meanings for the shell. The user is fully responsible for escaping as needed and that arguments using special characters may not be portable across shells. */
		argsCanBeInterpretedByShell?: boolean;
	}

	/** Response to `runInTerminal` request. */
	interface RunInTerminalResponse extends Response {
		body: {
			/** The process ID. The value should be less than or equal to 2147483647 (2^31-1). */
			processId?: number;
			/** The process ID of the terminal shell. The value should be less than or equal to 2147483647 (2^31-1). */
			shellProcessId?: number;
		};
	}

	/** Initialize request; value of command field is 'initialize'.
		The `initialize` request is sent as the first request from the client to the debug adapter in order to configure it with client capabilities and to retrieve capabilities from the debug adapter.
		Until the debug adapter has responded with an `initialize` response, the client must not send any additional requests or events to the debug adapter.
		In addition the debug adapter is not allowed to send any requests or events to the client until it has responded with an `initialize` response.
		The `initialize` request may only be sent once.
	*/
	interface InitializeRequest extends Request {
		// command: 'initialize';
		arguments: InitializeRequestArguments;
	}

	/** Arguments for `initialize` request. */
	interface InitializeRequestArguments {
		/** The ID of the client using this adapter. */
		clientID?: string;
		/** The human-readable name of the client using this adapter. */
		clientName?: string;
		/** The ID of the debug adapter. */
		adapterID: string;
		/** The ISO-639 locale of the client using this adapter, e.g. en-US or de-CH. */
		locale?: string;
		/** If true all line numbers are 1-based (default). */
		linesStartAt1?: boolean;
		/** If true all column numbers are 1-based (default). */
		columnsStartAt1?: boolean;
		/** Determines in what format paths are specified. The default is `path`, which is the native format.
			Values: 'path', 'uri', etc.
		*/
		pathFormat?: 'path' | 'uri' | string;
		/** Client supports the `type` attribute for variables. */
		supportsVariableType?: boolean;
		/** Client supports the paging of variables. */
		supportsVariablePaging?: boolean;
		/** Client supports the runInTerminal request. */
		supportsRunInTerminalRequest?: boolean;
		/** Client supports memory references. */
		supportsMemoryReferences?: boolean;
		/** Client supports progress reporting. */
		supportsProgressReporting?: boolean;
		/** Client supports the invalidated event. */
		supportsInvalidatedEvent?: boolean;
		/** Client supports the memory event. */
		supportsMemoryEvent?: boolean;
		/** Client supports the `argsCanBeInterpretedByShell` attribute on the `runInTerminal` request. */
		supportsArgsCanBeInterpretedByShell?: boolean;
	}

	/** Response to `initialize` request. */
	interface InitializeResponse extends Response {
		/** The capabilities of this debug adapter. */
		body?: Capabilities;
	}

	/** ConfigurationDone request; value of command field is 'configurationDone'.
		This request indicates that the client has finished initialization of the debug adapter.
		So it is the last request in the sequence of configuration requests (which was started by the `initialized` event).
		Clients should only call this request if the corresponding capability `supportsConfigurationDoneRequest` is true.
	*/
	interface ConfigurationDoneRequest extends Request {
		// command: 'configurationDone';
		arguments?: ConfigurationDoneArguments;
	}

	/** Arguments for `configurationDone` request. */
	interface ConfigurationDoneArguments {
	}

	/** Response to `configurationDone` request. This is just an acknowledgement, so no body field is required. */
	interface ConfigurationDoneResponse extends Response {
	}

	/** Launch request; value of command field is 'launch'.
		This launch request is sent from the client to the debug adapter to start the debuggee with or without debugging (if `noDebug` is true).
		Since launching is debugger/runtime specific, the arguments for this request are not part of this specification.
	*/
	interface LaunchRequest extends Request {
		// command: 'launch';
		arguments: LaunchRequestArguments;
	}

	/** Arguments for `launch` request. Additional attributes are implementation specific. */
	interface LaunchRequestArguments {
		/** If noDebug is true, the launch request should launch the program without enabling debugging. */
		noDebug?: boolean;
		/** Arbitrary data from the previous, restarted session.
			The data is sent as the `restart` attribute of the `terminated` event.
			The client should leave the data intact.
		*/
		__restart?: any;
	}

	/** Response to `launch` request. This is just an acknowledgement, so no body field is required. */
	interface LaunchResponse extends Response {
	}

	/** Attach request; value of command field is 'attach'.
		The attach request is sent from the client to the debug adapter to attach to a debuggee that is already running.
		Since attaching is debugger/runtime specific, the arguments for this request are not part of this specification.
	*/
	interface AttachRequest extends Request {
		// command: 'attach';
		arguments: AttachRequestArguments;
	}

	/** Arguments for `attach` request. Additional attributes are implementation specific. */
	interface AttachRequestArguments {
		/** Arbitrary data from the previous, restarted session.
			The data is sent as the `restart` attribute of the `terminated` event.
			The client should leave the data intact.
		*/
		__restart?: any;
	}

	/** Response to `attach` request. This is just an acknowledgement, so no body field is required. */
	interface AttachResponse extends Response {
	}

	/** Restart request; value of command field is 'restart'.
		Restarts a debug session. Clients should only call this request if the corresponding capability `supportsRestartRequest` is true.
		If the capability is missing or has the value false, a typical client emulates `restart` by terminating the debug adapter first and then launching it anew.
	*/
	interface RestartRequest extends Request {
		// command: 'restart';
		arguments?: RestartArguments;
	}

	/** Arguments for `restart` request. */
	interface RestartArguments {
		/** The latest version of the `launch` or `attach` configuration. */
		arguments?: LaunchRequestArguments | AttachRequestArguments;
	}

	/** Response to `restart` request. This is just an acknowledgement, so no body field is required. */
	interface RestartResponse extends Response {
	}

	/** Disconnect request; value of command field is 'disconnect'.
		The `disconnect` request asks the debug adapter to disconnect from the debuggee (thus ending the debug session) and then to shut down itself (the debug adapter).
		In addition, the debug adapter must terminate the debuggee if it was started with the `launch` request. If an `attach` request was used to connect to the debuggee, then the debug adapter must not terminate the debuggee.
		This implicit behavior of when to terminate the debuggee can be overridden with the `terminateDebuggee` argument (which is only supported by a debug adapter if the corresponding capability `supportTerminateDebuggee` is true).
	*/
	interface DisconnectRequest extends Request {
		// command: 'disconnect';
		arguments?: DisconnectArguments;
	}

	/** Arguments for `disconnect` request. */
	interface DisconnectArguments {
		/** A value of true indicates that this `disconnect` request is part of a restart sequence. */
		restart?: boolean;
		/** Indicates whether the debuggee should be terminated when the debugger is disconnected.
			If unspecified, the debug adapter is free to do whatever it thinks is best.
			The attribute is only honored by a debug adapter if the corresponding capability `supportTerminateDebuggee` is true.
		*/
		terminateDebuggee?: boolean;
		/** Indicates whether the debuggee should stay suspended when the debugger is disconnected.
			If unspecified, the debuggee should resume execution.
			The attribute is only honored by a debug adapter if the corresponding capability `supportSuspendDebuggee` is true.
		*/
		suspendDebuggee?: boolean;
	}

	/** Response to `disconnect` request. This is just an acknowledgement, so no body field is required. */
	interface DisconnectResponse extends Response {
	}

	/** Terminate request; value of command field is 'terminate'.
		The `terminate` request is sent from the client to the debug adapter in order to shut down the debuggee gracefully. Clients should only call this request if the capability `supportsTerminateRequest` is true.
		Typically a debug adapter implements `terminate` by sending a software signal which the debuggee intercepts in order to clean things up properly before terminating itself.
		Please note that this request does not directly affect the state of the debug session: if the debuggee decides to veto the graceful shutdown for any reason by not terminating itself, then the debug session just continues.
		Clients can surface the `terminate` request as an explicit command or they can integrate it into a two stage Stop command that first sends `terminate` to request a graceful shutdown, and if that fails uses `disconnect` for a forceful shutdown.
	*/
	interface TerminateRequest extends Request {
		// command: 'terminate';
		arguments?: TerminateArguments;
	}

	/** Arguments for `terminate` request. */
	interface TerminateArguments {
		/** A value of true indicates that this `terminate` request is part of a restart sequence. */
		restart?: boolean;
	}

	/** Response to `terminate` request. This is just an acknowledgement, so no body field is required. */
	interface TerminateResponse extends Response {
	}

	/** BreakpointLocations request; value of command field is 'breakpointLocations'.
		The `breakpointLocations` request returns all possible locations for source breakpoints in a given range.
		Clients should only call this request if the corresponding capability `supportsBreakpointLocationsRequest` is true.
	*/
	interface BreakpointLocationsRequest extends Request {
		// command: 'breakpointLocations';
		arguments?: BreakpointLocationsArguments;
	}

	/** Arguments for `breakpointLocations` request. */
	interface BreakpointLocationsArguments {
		/** The source location of the breakpoints; either `source.path` or `source.reference` must be specified. */
		source: Source;
		/** Start line of range to search possible breakpoint locations in. If only the line is specified, the request returns all possible locations in that line. */
		line: number;
		/** Start column of range to search possible breakpoint locations in. If no start column is given, the first column in the start line is assumed. */
		column?: number;
		/** End line of range to search possible breakpoint locations in. If no end line is given, then the end line is assumed to be the start line. */
		endLine?: number;
		/** End column of range to search possible breakpoint locations in. If no end column is given, then it is assumed to be in the last column of the end line. */
		endColumn?: number;
	}

	/** Response to `breakpointLocations` request.
		Contains possible locations for source breakpoints.
	*/
	interface BreakpointLocationsResponse extends Response {
		body: {
			/** Sorted set of possible breakpoint locations. */
			breakpoints: BreakpointLocation[];
		};
	}

	/** SetBreakpoints request; value of command field is 'setBreakpoints'.
		Sets multiple breakpoints for a single source and clears all previous breakpoints in that source.
		To clear all breakpoint for a source, specify an empty array.
		When a breakpoint is hit, a `stopped` event (with reason `breakpoint`) is generated.
	*/
	interface SetBreakpointsRequest extends Request {
		// command: 'setBreakpoints';
		arguments: SetBreakpointsArguments;
	}

	/** Arguments for `setBreakpoints` request. */
	interface SetBreakpointsArguments {
		/** The source location of the breakpoints; either `source.path` or `source.sourceReference` must be specified. */
		source: Source;
		/** The code locations of the breakpoints. */
		breakpoints?: SourceBreakpoint[];
		/** Deprecated: The code locations of the breakpoints. */
		lines?: number[];
		/** A value of true indicates that the underlying source has been modified which results in new breakpoint locations. */
		sourceModified?: boolean;
	}

	/** Response to `setBreakpoints` request.
		Returned is information about each breakpoint created by this request.
		This includes the actual code location and whether the breakpoint could be verified.
		The breakpoints returned are in the same order as the elements of the `breakpoints`
		(or the deprecated `lines`) array in the arguments.
	*/
	interface SetBreakpointsResponse extends Response {
		body: {
			/** Information about the breakpoints.
				The array elements are in the same order as the elements of the `breakpoints` (or the deprecated `lines`) array in the arguments.
			*/
			breakpoints: Breakpoint[];
		};
	}

	/** SetFunctionBreakpoints request; value of command field is 'setFunctionBreakpoints'.
		Replaces all existing function breakpoints with new function breakpoints.
		To clear all function breakpoints, specify an empty array.
		When a function breakpoint is hit, a `stopped` event (with reason `function breakpoint`) is generated.
		Clients should only call this request if the corresponding capability `supportsFunctionBreakpoints` is true.
	*/
	interface SetFunctionBreakpointsRequest extends Request {
		// command: 'setFunctionBreakpoints';
		arguments: SetFunctionBreakpointsArguments;
	}

	/** Arguments for `setFunctionBreakpoints` request. */
	interface SetFunctionBreakpointsArguments {
		/** The function names of the breakpoints. */
		breakpoints: FunctionBreakpoint[];
	}

	/** Response to `setFunctionBreakpoints` request.
		Returned is information about each breakpoint created by this request.
	*/
	interface SetFunctionBreakpointsResponse extends Response {
		body: {
			/** Information about the breakpoints. The array elements correspond to the elements of the `breakpoints` array. */
			breakpoints: Breakpoint[];
		};
	}

	/** SetExceptionBreakpoints request; value of command field is 'setExceptionBreakpoints'.
		The request configures the debugger's response to thrown exceptions.
		If an exception is configured to break, a `stopped` event is fired (with reason `exception`).
		Clients should only call this request if the corresponding capability `exceptionBreakpointFilters` returns one or more filters.
	*/
	interface SetExceptionBreakpointsRequest extends Request {
		// command: 'setExceptionBreakpoints';
		arguments: SetExceptionBreakpointsArguments;
	}

	/** Arguments for `setExceptionBreakpoints` request. */
	interface SetExceptionBreakpointsArguments {
		/** Set of exception filters specified by their ID. The set of all possible exception filters is defined by the `exceptionBreakpointFilters` capability. The `filter` and `filterOptions` sets are additive. */
		filters: string[];
		/** Set of exception filters and their options. The set of all possible exception filters is defined by the `exceptionBreakpointFilters` capability. This attribute is only honored by a debug adapter if the corresponding capability `supportsExceptionFilterOptions` is true. The `filter` and `filterOptions` sets are additive. */
		filterOptions?: ExceptionFilterOptions[];
		/** Configuration options for selected exceptions.
			The attribute is only honored by a debug adapter if the corresponding capability `supportsExceptionOptions` is true.
		*/
		exceptionOptions?: ExceptionOptions[];
	}

	/** Response to `setExceptionBreakpoints` request.
		The response contains an array of `Breakpoint` objects with information about each exception breakpoint or filter. The `Breakpoint` objects are in the same order as the elements of the `filters`, `filterOptions`, `exceptionOptions` arrays given as arguments. If both `filters` and `filterOptions` are given, the returned array must start with `filters` information first, followed by `filterOptions` information.
		The `verified` property of a `Breakpoint` object signals whether the exception breakpoint or filter could be successfully created and whether the condition or hit count expressions are valid. In case of an error the `message` property explains the problem. The `id` property can be used to introduce a unique ID for the exception breakpoint or filter so that it can be updated subsequently by sending breakpoint events.
		For backward compatibility both the `breakpoints` array and the enclosing `body` are optional. If these elements are missing a client is not able to show problems for individual exception breakpoints or filters.
	*/
	interface SetExceptionBreakpointsResponse extends Response {
		body?: {
			/** Information about the exception breakpoints or filters.
				The breakpoints returned are in the same order as the elements of the `filters`, `filterOptions`, `exceptionOptions` arrays in the arguments. If both `filters` and `filterOptions` are given, the returned array must start with `filters` information first, followed by `filterOptions` information.
			*/
			breakpoints?: Breakpoint[];
		};
	}

	/** DataBreakpointInfo request; value of command field is 'dataBreakpointInfo'.
		Obtains information on a possible data breakpoint that could be set on an expression or variable.
		Clients should only call this request if the corresponding capability `supportsDataBreakpoints` is true.
	*/
	interface DataBreakpointInfoRequest extends Request {
		// command: 'dataBreakpointInfo';
		arguments: DataBreakpointInfoArguments;
	}

	/** Arguments for `dataBreakpointInfo` request. */
	interface DataBreakpointInfoArguments {
		/** Reference to the Variable container if the data breakpoint is requested for a child of the container. */
		variablesReference?: number;
		/** The name of the variable's child to obtain data breakpoint information for.
			If variablesReference isn't provided, this can be an expression.
		*/
		name: string;
	}

	/** Response to `dataBreakpointInfo` request. */
	interface DataBreakpointInfoResponse extends Response {
		body: {
			/** An identifier for the data on which a data breakpoint can be registered with the setDataBreakpoints request or null if no data breakpoint is available. */
			dataId: string | null;
			/** UI string that describes on what data the breakpoint is set on or why a data breakpoint is not available. */
			description: string;
			/** Attribute lists the available access types for a potential data breakpoint. A UI client could surface this information. */
			accessTypes?: DataBreakpointAccessType[];
			/** Attribute indicates that a potential data breakpoint could be persisted across sessions. */
			canPersist?: boolean;
		};
	}

	/** SetDataBreakpoints request; value of command field is 'setDataBreakpoints'.
		Replaces all existing data breakpoints with new data breakpoints.
		To clear all data breakpoints, specify an empty array.
		When a data breakpoint is hit, a `stopped` event (with reason `data breakpoint`) is generated.
		Clients should only call this request if the corresponding capability `supportsDataBreakpoints` is true.
	*/
	interface SetDataBreakpointsRequest extends Request {
		// command: 'setDataBreakpoints';
		arguments: SetDataBreakpointsArguments;
	}

	/** Arguments for `setDataBreakpoints` request. */
	interface SetDataBreakpointsArguments {
		/** The contents of this array replaces all existing data breakpoints. An empty array clears all data breakpoints. */
		breakpoints: DataBreakpoint[];
	}

	/** Response to `setDataBreakpoints` request.
		Returned is information about each breakpoint created by this request.
	*/
	interface SetDataBreakpointsResponse extends Response {
		body: {
			/** Information about the data breakpoints. The array elements correspond to the elements of the input argument `breakpoints` array. */
			breakpoints: Breakpoint[];
		};
	}

	/** SetInstructionBreakpoints request; value of command field is 'setInstructionBreakpoints'.
		Replaces all existing instruction breakpoints. Typically, instruction breakpoints would be set from a disassembly window. 
		To clear all instruction breakpoints, specify an empty array.
		When an instruction breakpoint is hit, a `stopped` event (with reason `instruction breakpoint`) is generated.
		Clients should only call this request if the corresponding capability `supportsInstructionBreakpoints` is true.
	*/
	interface SetInstructionBreakpointsRequest extends Request {
		// command: 'setInstructionBreakpoints';
		arguments: SetInstructionBreakpointsArguments;
	}

	/** Arguments for `setInstructionBreakpoints` request */
	interface SetInstructionBreakpointsArguments {
		/** The instruction references of the breakpoints */
		breakpoints: InstructionBreakpoint[];
	}

	/** Response to `setInstructionBreakpoints` request */
	interface SetInstructionBreakpointsResponse extends Response {
		body: {
			/** Information about the breakpoints. The array elements correspond to the elements of the `breakpoints` array. */
			breakpoints: Breakpoint[];
		};
	}

	/** Continue request; value of command field is 'continue'.
		The request resumes execution of all threads. If the debug adapter supports single thread execution (see capability `supportsSingleThreadExecutionRequests`), setting the `singleThread` argument to true resumes only the specified thread. If not all threads were resumed, the `allThreadsContinued` attribute of the response should be set to false.
	*/
	interface ContinueRequest extends Request {
		// command: 'continue';
		arguments: ContinueArguments;
	}

	/** Arguments for `continue` request. */
	interface ContinueArguments {
		/** Specifies the active thread. If the debug adapter supports single thread execution (see `supportsSingleThreadExecutionRequests`) and the argument `singleThread` is true, only the thread with this ID is resumed. */
		threadId: number;
		/** If this flag is true, execution is resumed only for the thread with given `threadId`. */
		singleThread?: boolean;
	}

	/** Response to `continue` request. */
	interface ContinueResponse extends Response {
		body: {
			/** The value true (or a missing property) signals to the client that all threads have been resumed. The value false indicates that not all threads were resumed. */
			allThreadsContinued?: boolean;
		};
	}

	/** Next request; value of command field is 'next'.
		The request executes one step (in the given granularity) for the specified thread and allows all other threads to run freely by resuming them.
		If the debug adapter supports single thread execution (see capability `supportsSingleThreadExecutionRequests`), setting the `singleThread` argument to true prevents other suspended threads from resuming.
		The debug adapter first sends the response and then a `stopped` event (with reason `step`) after the step has completed.
	*/
	interface NextRequest extends Request {
		// command: 'next';
		arguments: NextArguments;
	}

	/** Arguments for `next` request. */
	interface NextArguments {
		/** Specifies the thread for which to resume execution for one step (of the given granularity). */
		threadId: number;
		/** If this flag is true, all other suspended threads are not resumed. */
		singleThread?: boolean;
		/** Stepping granularity. If no granularity is specified, a granularity of `statement` is assumed. */
		granularity?: SteppingGranularity;
	}

	/** Response to `next` request. This is just an acknowledgement, so no body field is required. */
	interface NextResponse extends Response {
	}

	/** StepIn request; value of command field is 'stepIn'.
		The request resumes the given thread to step into a function/method and allows all other threads to run freely by resuming them.
		If the debug adapter supports single thread execution (see capability `supportsSingleThreadExecutionRequests`), setting the `singleThread` argument to true prevents other suspended threads from resuming.
		If the request cannot step into a target, `stepIn` behaves like the `next` request.
		The debug adapter first sends the response and then a `stopped` event (with reason `step`) after the step has completed.
		If there are multiple function/method calls (or other targets) on the source line,
		the argument `targetId` can be used to control into which target the `stepIn` should occur.
		The list of possible targets for a given source line can be retrieved via the `stepInTargets` request.
	*/
	interface StepInRequest extends Request {
		// command: 'stepIn';
		arguments: StepInArguments;
	}

	/** Arguments for `stepIn` request. */
	interface StepInArguments {
		/** Specifies the thread for which to resume execution for one step-into (of the given granularity). */
		threadId: number;
		/** If this flag is true, all other suspended threads are not resumed. */
		singleThread?: boolean;
		/** Id of the target to step into. */
		targetId?: number;
		/** Stepping granularity. If no granularity is specified, a granularity of `statement` is assumed. */
		granularity?: SteppingGranularity;
	}

	/** Response to `stepIn` request. This is just an acknowledgement, so no body field is required. */
	interface StepInResponse extends Response {
	}

	/** StepOut request; value of command field is 'stepOut'.
		The request resumes the given thread to step out (return) from a function/method and allows all other threads to run freely by resuming them.
		If the debug adapter supports single thread execution (see capability `supportsSingleThreadExecutionRequests`), setting the `singleThread` argument to true prevents other suspended threads from resuming.
		The debug adapter first sends the response and then a `stopped` event (with reason `step`) after the step has completed.
	*/
	interface StepOutRequest extends Request {
		// command: 'stepOut';
		arguments: StepOutArguments;
	}

	/** Arguments for `stepOut` request. */
	interface StepOutArguments {
		/** Specifies the thread for which to resume execution for one step-out (of the given granularity). */
		threadId: number;
		/** If this flag is true, all other suspended threads are not resumed. */
		singleThread?: boolean;
		/** Stepping granularity. If no granularity is specified, a granularity of `statement` is assumed. */
		granularity?: SteppingGranularity;
	}

	/** Response to `stepOut` request. This is just an acknowledgement, so no body field is required. */
	interface StepOutResponse extends Response {
	}

	/** StepBack request; value of command field is 'stepBack'.
		The request executes one backward step (in the given granularity) for the specified thread and allows all other threads to run backward freely by resuming them.
		If the debug adapter supports single thread execution (see capability `supportsSingleThreadExecutionRequests`), setting the `singleThread` argument to true prevents other suspended threads from resuming.
		The debug adapter first sends the response and then a `stopped` event (with reason `step`) after the step has completed.
		Clients should only call this request if the corresponding capability `supportsStepBack` is true.
	*/
	interface StepBackRequest extends Request {
		// command: 'stepBack';
		arguments: StepBackArguments;
	}

	/** Arguments for `stepBack` request. */
	interface StepBackArguments {
		/** Specifies the thread for which to resume execution for one step backwards (of the given granularity). */
		threadId: number;
		/** If this flag is true, all other suspended threads are not resumed. */
		singleThread?: boolean;
		/** Stepping granularity to step. If no granularity is specified, a granularity of `statement` is assumed. */
		granularity?: SteppingGranularity;
	}

	/** Response to `stepBack` request. This is just an acknowledgement, so no body field is required. */
	interface StepBackResponse extends Response {
	}

	/** ReverseContinue request; value of command field is 'reverseContinue'.
		The request resumes backward execution of all threads. If the debug adapter supports single thread execution (see capability `supportsSingleThreadExecutionRequests`), setting the `singleThread` argument to true resumes only the specified thread. If not all threads were resumed, the `allThreadsContinued` attribute of the response should be set to false.
		Clients should only call this request if the corresponding capability `supportsStepBack` is true.
	*/
	interface ReverseContinueRequest extends Request {
		// command: 'reverseContinue';
		arguments: ReverseContinueArguments;
	}

	/** Arguments for `reverseContinue` request. */
	interface ReverseContinueArguments {
		/** Specifies the active thread. If the debug adapter supports single thread execution (see `supportsSingleThreadExecutionRequests`) and the `singleThread` argument is true, only the thread with this ID is resumed. */
		threadId: number;
		/** If this flag is true, backward execution is resumed only for the thread with given `threadId`. */
		singleThread?: boolean;
	}

	/** Response to `reverseContinue` request. This is just an acknowledgement, so no body field is required. */
	interface ReverseContinueResponse extends Response {
	}

	/** RestartFrame request; value of command field is 'restartFrame'.
		The request restarts execution of the specified stackframe.
		The debug adapter first sends the response and then a `stopped` event (with reason `restart`) after the restart has completed.
		Clients should only call this request if the corresponding capability `supportsRestartFrame` is true.
	*/
	interface RestartFrameRequest extends Request {
		// command: 'restartFrame';
		arguments: RestartFrameArguments;
	}

	/** Arguments for `restartFrame` request. */
	interface RestartFrameArguments {
		/** Restart this stackframe. */
		frameId: number;
	}

	/** Response to `restartFrame` request. This is just an acknowledgement, so no body field is required. */
	interface RestartFrameResponse extends Response {
	}

	/** Goto request; value of command field is 'goto'.
		The request sets the location where the debuggee will continue to run.
		This makes it possible to skip the execution of code or to execute code again.
		The code between the current location and the goto target is not executed but skipped.
		The debug adapter first sends the response and then a `stopped` event with reason `goto`.
		Clients should only call this request if the corresponding capability `supportsGotoTargetsRequest` is true (because only then goto targets exist that can be passed as arguments).
	*/
	interface GotoRequest extends Request {
		// command: 'goto';
		arguments: GotoArguments;
	}

	/** Arguments for `goto` request. */
	interface GotoArguments {
		/** Set the goto target for this thread. */
		threadId: number;
		/** The location where the debuggee will continue to run. */
		targetId: number;
	}

	/** Response to `goto` request. This is just an acknowledgement, so no body field is required. */
	interface GotoResponse extends Response {
	}

	/** Pause request; value of command field is 'pause'.
		The request suspends the debuggee.
		The debug adapter first sends the response and then a `stopped` event (with reason `pause`) after the thread has been paused successfully.
	*/
	interface PauseRequest extends Request {
		// command: 'pause';
		arguments: PauseArguments;
	}

	/** Arguments for `pause` request. */
	interface PauseArguments {
		/** Pause execution for this thread. */
		threadId: number;
	}

	/** Response to `pause` request. This is just an acknowledgement, so no body field is required. */
	interface PauseResponse extends Response {
	}

	/** StackTrace request; value of command field is 'stackTrace'.
		The request returns a stacktrace from the current execution state of a given thread.
		A client can request all stack frames by omitting the startFrame and levels arguments. For performance-conscious clients and if the corresponding capability `supportsDelayedStackTraceLoading` is true, stack frames can be retrieved in a piecemeal way with the startFrame and levels arguments. The response of the stackTrace request may contain a totalFrames property that hints at the total number of frames in the stack. If a client needs this total number upfront, it can issue a request for a single (first) frame and depending on the value of totalFrames decide how to proceed. In any case a client should be prepared to receive fewer frames than requested, which is an indication that the end of the stack has been reached.
	*/
	interface StackTraceRequest extends Request {
		// command: 'stackTrace';
		arguments: StackTraceArguments;
	}

	/** Arguments for `stackTrace` request. */
	interface StackTraceArguments {
		/** Retrieve the stacktrace for this thread. */
		threadId: number;
		/** The index of the first frame to return; if omitted frames start at 0. */
		startFrame?: number;
		/** The maximum number of frames to return. If levels is not specified or 0, all frames are returned. */
		levels?: number;
		/** Specifies details on how to format the stack frames.
			The attribute is only honored by a debug adapter if the corresponding capability `supportsValueFormattingOptions` is true.
		*/
		format?: StackFrameFormat;
	}

	/** Response to `stackTrace` request. */
	interface StackTraceResponse extends Response {
		body: {
			/** The frames of the stackframe. If the array has length zero, there are no stackframes available.
				This means that there is no location information available.
			*/
			stackFrames: StackFrame[];
			/** The total number of frames available in the stack. If omitted or if totalFrames is larger than the available frames, a client is expected to request frames until a request returns less frames than requested (which indicates the end of the stack). Returning monotonically increasing totalFrames values for subsequent requests can be used to enforce paging in the client. */
			totalFrames?: number;
		};
	}

	/** Scopes request; value of command field is 'scopes'.
		The request returns the variable scopes for a given stackframe ID.
	*/
	interface ScopesRequest extends Request {
		// command: 'scopes';
		arguments: ScopesArguments;
	}

	/** Arguments for `scopes` request. */
	interface ScopesArguments {
		/** Retrieve the scopes for this stackframe. */
		frameId: number;
	}

	/** Response to `scopes` request. */
	interface ScopesResponse extends Response {
		body: {
			/** The scopes of the stackframe. If the array has length zero, there are no scopes available. */
			scopes: Scope[];
		};
	}

	/** Variables request; value of command field is 'variables'.
		Retrieves all child variables for the given variable reference.
		A filter can be used to limit the fetched children to either named or indexed children.
	*/
	interface VariablesRequest extends Request {
		// command: 'variables';
		arguments: VariablesArguments;
	}

	/** Arguments for `variables` request. */
	interface VariablesArguments {
		/** The Variable reference. */
		variablesReference: number;
		/** Filter to limit the child variables to either named or indexed. If omitted, both types are fetched. */
		filter?: 'indexed' | 'named';
		/** The index of the first variable to return; if omitted children start at 0. */
		start?: number;
		/** The number of variables to return. If count is missing or 0, all variables are returned. */
		count?: number;
		/** Specifies details on how to format the Variable values.
			The attribute is only honored by a debug adapter if the corresponding capability `supportsValueFormattingOptions` is true.
		*/
		format?: ValueFormat;
	}

	/** Response to `variables` request. */
	interface VariablesResponse extends Response {
		body: {
			/** All (or a range) of variables for the given variable reference. */
			variables: Variable[];
		};
	}

	/** SetVariable request; value of command field is 'setVariable'.
		Set the variable with the given name in the variable container to a new value. Clients should only call this request if the corresponding capability `supportsSetVariable` is true.
		If a debug adapter implements both `setVariable` and `setExpression`, a client will only use `setExpression` if the variable has an `evaluateName` property.
	*/
	interface SetVariableRequest extends Request {
		// command: 'setVariable';
		arguments: SetVariableArguments;
	}

	/** Arguments for `setVariable` request. */
	interface SetVariableArguments {
		/** The reference of the variable container. */
		variablesReference: number;
		/** The name of the variable in the container. */
		name: string;
		/** The value of the variable. */
		value: string;
		/** Specifies details on how to format the response value. */
		format?: ValueFormat;
	}

	/** Response to `setVariable` request. */
	interface SetVariableResponse extends Response {
		body: {
			/** The new value of the variable. */
			value: string;
			/** The type of the new value. Typically shown in the UI when hovering over the value. */
			type?: string;
			/** If variablesReference is > 0, the new value is structured and its children can be retrieved by passing variablesReference to the VariablesRequest.
				The value should be less than or equal to 2147483647 (2^31-1).
			*/
			variablesReference?: number;
			/** The number of named child variables.
				The client can use this information to present the variables in a paged UI and fetch them in chunks.
				The value should be less than or equal to 2147483647 (2^31-1).
			*/
			namedVariables?: number;
			/** The number of indexed child variables.
				The client can use this information to present the variables in a paged UI and fetch them in chunks.
				The value should be less than or equal to 2147483647 (2^31-1).
			*/
			indexedVariables?: number;
		};
	}

	/** Source request; value of command field is 'source'.
		The request retrieves the source code for a given source reference.
	*/
	interface SourceRequest extends Request {
		// command: 'source';
		arguments: SourceArguments;
	}

	/** Arguments for `source` request. */
	interface SourceArguments {
		/** Specifies the source content to load. Either source.path or source.sourceReference must be specified. */
		source?: Source;
		/** The reference to the source. This is the same as source.sourceReference.
			This is provided for backward compatibility since old clients do not understand the `source` attribute.
		*/
		sourceReference: number;
	}

	/** Response to `source` request. */
	interface SourceResponse extends Response {
		body: {
			/** Content of the source reference. */
			content: string;
			/** Content type (MIME type) of the source. */
			mimeType?: string;
		};
	}

	/** Threads request; value of command field is 'threads'.
		The request retrieves a list of all threads.
	*/
	interface ThreadsRequest extends Request {
		// command: 'threads';
	}

	/** Response to `threads` request. */
	interface ThreadsResponse extends Response {
		body: {
			/** All threads. */
			threads: Thread[];
		};
	}

	/** TerminateThreads request; value of command field is 'terminateThreads'.
		The request terminates the threads with the given ids.
		Clients should only call this request if the corresponding capability `supportsTerminateThreadsRequest` is true.
	*/
	interface TerminateThreadsRequest extends Request {
		// command: 'terminateThreads';
		arguments: TerminateThreadsArguments;
	}

	/** Arguments for `terminateThreads` request. */
	interface TerminateThreadsArguments {
		/** Ids of threads to be terminated. */
		threadIds?: number[];
	}

	/** Response to `terminateThreads` request. This is just an acknowledgement, so no body field is required. */
	interface TerminateThreadsResponse extends Response {
	}

	/** Modules request; value of command field is 'modules'.
		Modules can be retrieved from the debug adapter with this request which can either return all modules or a range of modules to support paging.
		Clients should only call this request if the corresponding capability `supportsModulesRequest` is true.
	*/
	interface ModulesRequest extends Request {
		// command: 'modules';
		arguments: ModulesArguments;
	}

	/** Arguments for `modules` request. */
	interface ModulesArguments {
		/** The index of the first module to return; if omitted modules start at 0. */
		startModule?: number;
		/** The number of modules to return. If moduleCount is not specified or 0, all modules are returned. */
		moduleCount?: number;
	}

	/** Response to `modules` request. */
	interface ModulesResponse extends Response {
		body: {
			/** All modules or range of modules. */
			modules: Module[];
			/** The total number of modules available. */
			totalModules?: number;
		};
	}

	/** LoadedSources request; value of command field is 'loadedSources'.
		Retrieves the set of all sources currently loaded by the debugged process.
		Clients should only call this request if the corresponding capability `supportsLoadedSourcesRequest` is true.
	*/
	interface LoadedSourcesRequest extends Request {
		// command: 'loadedSources';
		arguments?: LoadedSourcesArguments;
	}

	/** Arguments for `loadedSources` request. */
	interface LoadedSourcesArguments {
	}

	/** Response to `loadedSources` request. */
	interface LoadedSourcesResponse extends Response {
		body: {
			/** Set of loaded sources. */
			sources: Source[];
		};
	}

	/** Evaluate request; value of command field is 'evaluate'.
		Evaluates the given expression in the context of the topmost stack frame.
		The expression has access to any variables and arguments that are in scope.
	*/
	interface EvaluateRequest extends Request {
		// command: 'evaluate';
		arguments: EvaluateArguments;
	}

	/** Arguments for `evaluate` request. */
	interface EvaluateArguments {
		/** The expression to evaluate. */
		expression: string;
		/** Evaluate the expression in the scope of this stack frame. If not specified, the expression is evaluated in the global scope. */
		frameId?: number;
		/** The context in which the evaluate request is used.
			Values: 
			'variables': evaluate is called from a variables view context.
			'watch': evaluate is called from a watch view context.
			'repl': evaluate is called from a REPL context.
			'hover': evaluate is called to generate the debug hover contents.
			This value should only be used if the corresponding capability `supportsEvaluateForHovers` is true.
			'clipboard': evaluate is called to generate clipboard contents.
			This value should only be used if the corresponding capability `supportsClipboardContext` is true.
			etc.
		*/
		context?: 'variables' | 'watch' | 'repl' | 'hover' | 'clipboard' | string;
		/** Specifies details on how to format the result.
			The attribute is only honored by a debug adapter if the corresponding capability `supportsValueFormattingOptions` is true.
		*/
		format?: ValueFormat;
	}

	/** Response to `evaluate` request. */
	interface EvaluateResponse extends Response {
		body: {
			/** The result of the evaluate request. */
			result: string;
			/** The type of the evaluate result.
				This attribute should only be returned by a debug adapter if the ccorresponding capability  `supportsVariableType` is true.
			*/
			type?: string;
			/** Properties of an evaluate result that can be used to determine how to render the result in the UI. */
			presentationHint?: VariablePresentationHint;
			/** If variablesReference is > 0, the evaluate result is structured and its children can be retrieved by passing variablesReference to the VariablesRequest.
				The value should be less than or equal to 2147483647 (2^31-1).
			*/
			variablesReference: number;
			/** The number of named child variables.
				The client can use this information to present the variables in a paged UI and fetch them in chunks.
				The value should be less than or equal to 2147483647 (2^31-1).
			*/
			namedVariables?: number;
			/** The number of indexed child variables.
				The client can use this information to present the variables in a paged UI and fetch them in chunks.
				The value should be less than or equal to 2147483647 (2^31-1).
			*/
			indexedVariables?: number;
			/** A memory reference to a location appropriate for this result.
				For pointer type eval results, this is generally a reference to the memory address contained in the pointer.
				This attribute should be returned by a debug adapter if corresponding capability  `supportsMemoryReferences` is true.
			*/
			memoryReference?: string;
		};
	}

	/** SetExpression request; value of command field is 'setExpression'.
		Evaluates the given `value` expression and assigns it to the `expression` which must be a modifiable l-value.
		The expressions have access to any variables and arguments that are in scope of the specified frame.
		Clients should only call this request if the corresponding capability `supportsSetExpression` is true.
		If a debug adapter implements both setExpression and setVariable, a client uses `setExpression` if the variable has an `evaluateName` property.
	*/
	interface SetExpressionRequest extends Request {
		// command: 'setExpression';
		arguments: SetExpressionArguments;
	}

	/** Arguments for `setExpression` request. */
	interface SetExpressionArguments {
		/** The l-value expression to assign to. */
		expression: string;
		/** The value expression to assign to the l-value expression. */
		value: string;
		/** Evaluate the expressions in the scope of this stack frame. If not specified, the expressions are evaluated in the global scope. */
		frameId?: number;
		/** Specifies how the resulting value should be formatted. */
		format?: ValueFormat;
	}

	/** Response to `setExpression` request. */
	interface SetExpressionResponse extends Response {
		body: {
			/** The new value of the expression. */
			value: string;
			/** The type of the value.
				This attribute should only be returned by a debug adapter if the corresponding capability `supportsVariableType` is true.
			*/
			type?: string;
			/** Properties of a value that can be used to determine how to render the result in the UI. */
			presentationHint?: VariablePresentationHint;
			/** If variablesReference is > 0, the value is structured and its children can be retrieved by passing variablesReference to the VariablesRequest.
				The value should be less than or equal to 2147483647 (2^31-1).
			*/
			variablesReference?: number;
			/** The number of named child variables.
				The client can use this information to present the variables in a paged UI and fetch them in chunks.
				The value should be less than or equal to 2147483647 (2^31-1).
			*/
			namedVariables?: number;
			/** The number of indexed child variables.
				The client can use this information to present the variables in a paged UI and fetch them in chunks.
				The value should be less than or equal to 2147483647 (2^31-1).
			*/
			indexedVariables?: number;
		};
	}

	/** StepInTargets request; value of command field is 'stepInTargets'.
		This request retrieves the possible stepIn targets for the specified stack frame.
		These targets can be used in the `stepIn` request.
		Clients should only call this request if the corresponding capability `supportsStepInTargetsRequest` is true.
	*/
	interface StepInTargetsRequest extends Request {
		// command: 'stepInTargets';
		arguments: StepInTargetsArguments;
	}

	/** Arguments for `stepInTargets` request. */
	interface StepInTargetsArguments {
		/** The stack frame for which to retrieve the possible stepIn targets. */
		frameId: number;
	}

	/** Response to `stepInTargets` request. */
	interface StepInTargetsResponse extends Response {
		body: {
			/** The possible stepIn targets of the specified source location. */
			targets: StepInTarget[];
		};
	}

	/** GotoTargets request; value of command field is 'gotoTargets'.
		This request retrieves the possible goto targets for the specified source location.
		These targets can be used in the `goto` request.
		Clients should only call this request if the corresponding capability `supportsGotoTargetsRequest` is true.
	*/
	interface GotoTargetsRequest extends Request {
		// command: 'gotoTargets';
		arguments: GotoTargetsArguments;
	}

	/** Arguments for `gotoTargets` request. */
	interface GotoTargetsArguments {
		/** The source location for which the goto targets are determined. */
		source: Source;
		/** The line location for which the goto targets are determined. */
		line: number;
		/** A column location for which the goto targets are determined. */
		column?: number;
	}

	/** Response to `gotoTargets` request. */
	interface GotoTargetsResponse extends Response {
		body: {
			/** The possible goto targets of the specified location. */
			targets: GotoTarget[];
		};
	}

	/** Completions request; value of command field is 'completions'.
		Returns a list of possible completions for a given caret position and text.
		Clients should only call this request if the corresponding capability `supportsCompletionsRequest` is true.
	*/
	interface CompletionsRequest extends Request {
		// command: 'completions';
		arguments: CompletionsArguments;
	}

	/** Arguments for `completions` request. */
	interface CompletionsArguments {
		/** Returns completions in the scope of this stack frame. If not specified, the completions are returned for the global scope. */
		frameId?: number;
		/** One or more source lines. Typically this is the text a user has typed into the debug console before he asked for completion. */
		text: string;
		/** The character position for which to determine the completion proposals. */
		column: number;
		/** A line for which to determine the completion proposals. If missing the first line of the text is assumed. */
		line?: number;
	}

	/** Response to `completions` request. */
	interface CompletionsResponse extends Response {
		body: {
			/** The possible completions for . */
			targets: CompletionItem[];
		};
	}

	/** ExceptionInfo request; value of command field is 'exceptionInfo'.
		Retrieves the details of the exception that caused this event to be raised.
		Clients should only call this request if the corresponding capability `supportsExceptionInfoRequest` is true.
	*/
	interface ExceptionInfoRequest extends Request {
		// command: 'exceptionInfo';
		arguments: ExceptionInfoArguments;
	}

	/** Arguments for `exceptionInfo` request. */
	interface ExceptionInfoArguments {
		/** Thread for which exception information should be retrieved. */
		threadId: number;
	}

	/** Response to `exceptionInfo` request. */
	interface ExceptionInfoResponse extends Response {
		body: {
			/** ID of the exception that was thrown. */
			exceptionId: string;
			/** Descriptive text for the exception. */
			description?: string;
			/** Mode that caused the exception notification to be raised. */
			breakMode: ExceptionBreakMode;
			/** Detailed information about the exception. */
			details?: ExceptionDetails;
		};
	}

	/** ReadMemory request; value of command field is 'readMemory'.
		Reads bytes from memory at the provided location.
		Clients should only call this request if the corresponding capability `supportsReadMemoryRequest` is true.
	*/
	interface ReadMemoryRequest extends Request {
		// command: 'readMemory';
		arguments: ReadMemoryArguments;
	}

	/** Arguments for `readMemory` request. */
	interface ReadMemoryArguments {
		/** Memory reference to the base location from which data should be read. */
		memoryReference: string;
		/** Offset (in bytes) to be applied to the reference location before reading data. Can be negative. */
		offset?: number;
		/** Number of bytes to read at the specified location and offset. */
		count: number;
	}

	/** Response to `readMemory` request. */
	interface ReadMemoryResponse extends Response {
		body?: {
			/** The address of the first byte of data returned.
				Treated as a hex value if prefixed with `0x`, or as a decimal value otherwise.
			*/
			address: string;
			/** The number of unreadable bytes encountered after the last successfully read byte.
				This can be used to determine the number of bytes that should be skipped before a subsequent `readMemory` request succeeds.
			*/
			unreadableBytes?: number;
			/** The bytes read from memory, encoded using base64. */
			data?: string;
		};
	}

	/** WriteMemory request; value of command field is 'writeMemory'.
		Writes bytes to memory at the provided location.
		Clients should only call this request if the corresponding capability `supportsWriteMemoryRequest` is true.
	*/
	interface WriteMemoryRequest extends Request {
		// command: 'writeMemory';
		arguments: WriteMemoryArguments;
	}

	/** Arguments for `writeMemory` request. */
	interface WriteMemoryArguments {
		/** Memory reference to the base location to which data should be written. */
		memoryReference: string;
		/** Offset (in bytes) to be applied to the reference location before writing data. Can be negative. */
		offset?: number;
		/** Property to control partial writes. If true, the debug adapter should attempt to write memory even if the entire memory region is not writable. In such a case the debug adapter should stop after hitting the first byte of memory that cannot be written and return the number of bytes written in the response via the `offset` and `bytesWritten` properties.
			If false or missing, a debug adapter should attempt to verify the region is writable before writing, and fail the response if it is not.
		*/
		allowPartial?: boolean;
		/** Bytes to write, encoded using base64. */
		data: string;
	}

	/** Response to `writeMemory` request. */
	interface WriteMemoryResponse extends Response {
		body?: {
			/** Property that should be returned when `allowPartial` is true to indicate the offset of the first byte of data successfully written. Can be negative. */
			offset?: number;
			/** Property that should be returned when `allowPartial` is true to indicate the number of bytes starting from address that were successfully written. */
			bytesWritten?: number;
		};
	}

	/** Disassemble request; value of command field is 'disassemble'.
		Disassembles code stored at the provided location.
		Clients should only call this request if the corresponding capability `supportsDisassembleRequest` is true.
	*/
	interface DisassembleRequest extends Request {
		// command: 'disassemble';
		arguments: DisassembleArguments;
	}

	/** Arguments for `disassemble` request. */
	interface DisassembleArguments {
		/** Memory reference to the base location containing the instructions to disassemble. */
		memoryReference: string;
		/** Offset (in bytes) to be applied to the reference location before disassembling. Can be negative. */
		offset?: number;
		/** Offset (in instructions) to be applied after the byte offset (if any) before disassembling. Can be negative. */
		instructionOffset?: number;
		/** Number of instructions to disassemble starting at the specified location and offset.
			An adapter must return exactly this number of instructions - any unavailable instructions should be replaced with an implementation-defined 'invalid instruction' value.
		*/
		instructionCount: number;
		/** If true, the adapter should attempt to resolve memory addresses and other values to symbolic names. */
		resolveSymbols?: boolean;
	}

	/** Response to `disassemble` request. */
	interface DisassembleResponse extends Response {
		body?: {
			/** The list of disassembled instructions. */
			instructions: DisassembledInstruction[];
		};
	}

	/** Information about the capabilities of a debug adapter. */
	interface Capabilities {
		/** The debug adapter supports the `configurationDone` request. */
		supportsConfigurationDoneRequest?: boolean;
		/** The debug adapter supports function breakpoints. */
		supportsFunctionBreakpoints?: boolean;
		/** The debug adapter supports conditional breakpoints. */
		supportsConditionalBreakpoints?: boolean;
		/** The debug adapter supports breakpoints that break execution after a specified number of hits. */
		supportsHitConditionalBreakpoints?: boolean;
		/** The debug adapter supports a (side effect free) evaluate request for data hovers. */
		supportsEvaluateForHovers?: boolean;
		/** Available exception filter options for the `setExceptionBreakpoints` request. */
		exceptionBreakpointFilters?: ExceptionBreakpointsFilter[];
		/** The debug adapter supports stepping back via the `stepBack` and `reverseContinue` requests. */
		supportsStepBack?: boolean;
		/** The debug adapter supports setting a variable to a value. */
		supportsSetVariable?: boolean;
		/** The debug adapter supports restarting a frame. */
		supportsRestartFrame?: boolean;
		/** The debug adapter supports the `gotoTargets` request. */
		supportsGotoTargetsRequest?: boolean;
		/** The debug adapter supports the `stepInTargets` request. */
		supportsStepInTargetsRequest?: boolean;
		/** The debug adapter supports the `completions` request. */
		supportsCompletionsRequest?: boolean;
		/** The set of characters that should trigger completion in a REPL. If not specified, the UI should assume the `.` character. */
		completionTriggerCharacters?: string[];
		/** The debug adapter supports the `modules` request. */
		supportsModulesRequest?: boolean;
		/** The set of additional module information exposed by the debug adapter. */
		additionalModuleColumns?: ColumnDescriptor[];
		/** Checksum algorithms supported by the debug adapter. */
		supportedChecksumAlgorithms?: ChecksumAlgorithm[];
		/** The debug adapter supports the `restart` request. In this case a client should not implement `restart` by terminating and relaunching the adapter but by calling the RestartRequest. */
		supportsRestartRequest?: boolean;
		/** The debug adapter supports `exceptionOptions` on the setExceptionBreakpoints request. */
		supportsExceptionOptions?: boolean;
		/** The debug adapter supports a `format` attribute on the stackTraceRequest, variablesRequest, and evaluateRequest. */
		supportsValueFormattingOptions?: boolean;
		/** The debug adapter supports the `exceptionInfo` request. */
		supportsExceptionInfoRequest?: boolean;
		/** The debug adapter supports the `terminateDebuggee` attribute on the `disconnect` request. */
		supportTerminateDebuggee?: boolean;
		/** The debug adapter supports the `suspendDebuggee` attribute on the `disconnect` request. */
		supportSuspendDebuggee?: boolean;
		/** The debug adapter supports the delayed loading of parts of the stack, which requires that both the `startFrame` and `levels` arguments and the `totalFrames` result of the `StackTrace` request are supported. */
		supportsDelayedStackTraceLoading?: boolean;
		/** The debug adapter supports the `loadedSources` request. */
		supportsLoadedSourcesRequest?: boolean;
		/** The debug adapter supports logpoints by interpreting the `logMessage` attribute of the `SourceBreakpoint`. */
		supportsLogPoints?: boolean;
		/** The debug adapter supports the `terminateThreads` request. */
		supportsTerminateThreadsRequest?: boolean;
		/** The debug adapter supports the `setExpression` request. */
		supportsSetExpression?: boolean;
		/** The debug adapter supports the `terminate` request. */
		supportsTerminateRequest?: boolean;
		/** The debug adapter supports data breakpoints. */
		supportsDataBreakpoints?: boolean;
		/** The debug adapter supports the `readMemory` request. */
		supportsReadMemoryRequest?: boolean;
		/** The debug adapter supports the `writeMemory` request. */
		supportsWriteMemoryRequest?: boolean;
		/** The debug adapter supports the `disassemble` request. */
		supportsDisassembleRequest?: boolean;
		/** The debug adapter supports the `cancel` request. */
		supportsCancelRequest?: boolean;
		/** The debug adapter supports the `breakpointLocations` request. */
		supportsBreakpointLocationsRequest?: boolean;
		/** The debug adapter supports the `clipboard` context value in the `evaluate` request. */
		supportsClipboardContext?: boolean;
		/** The debug adapter supports stepping granularities (argument `granularity`) for the stepping requests. */
		supportsSteppingGranularity?: boolean;
		/** The debug adapter supports adding breakpoints based on instruction references. */
		supportsInstructionBreakpoints?: boolean;
		/** The debug adapter supports `filterOptions` as an argument on the `setExceptionBreakpoints` request. */
		supportsExceptionFilterOptions?: boolean;
		/** The debug adapter supports the `singleThread` property on the execution requests (`continue`, `next`, `stepIn`, `stepOut`, `reverseContinue`, `stepBack`). */
		supportsSingleThreadExecutionRequests?: boolean;
	}

	/** An ExceptionBreakpointsFilter is shown in the UI as an filter option for configuring how exceptions are dealt with. */
	interface ExceptionBreakpointsFilter {
		/** The internal ID of the filter option. This value is passed to the `setExceptionBreakpoints` request. */
		filter: string;
		/** The name of the filter option. This is shown in the UI. */
		label: string;
		/** A help text providing additional information about the exception filter. This string is typically shown as a hover and can be translated. */
		description?: string;
		/** Initial value of the filter option. If not specified a value `false` is assumed. */
		default?: boolean;
		/** Controls whether a condition can be specified for this filter option. If false or missing, a condition can not be set. */
		supportsCondition?: boolean;
		/** A help text providing information about the condition. This string is shown as the placeholder text for a text box and can be translated. */
		conditionDescription?: string;
	}

	/** A structured message object. Used to return errors from requests. */
	interface Message {
		/** Unique identifier for the message. */
		id: number;
		/** A format string for the message. Embedded variables have the form `{name}`.
			If variable name starts with an underscore character, the variable does not contain user data (PII) and can be safely used for telemetry purposes.
		*/
		format: string;
		/** An object used as a dictionary for looking up the variables in the format string. */
		variables?: { [key: string]: string; };
		/** If true send to telemetry. */
		sendTelemetry?: boolean;
		/** If true show user. */
		showUser?: boolean;
		/** A url where additional information about this message can be found. */
		url?: string;
		/** A label that is presented to the user as the UI for opening the url. */
		urlLabel?: string;
	}

	/** A Module object represents a row in the modules view.
		The `id` attribute identifies a module in the modules view and is used in a `module` event for identifying a module for adding, updating or deleting.
		The `name` attribute is used to minimally render the module in the UI.
		
		Additional attributes can be added to the module. They show up in the module view if they have a corresponding `ColumnDescriptor`.
		
		To avoid an unnecessary proliferation of additional attributes with similar semantics but different names, we recommend to re-use attributes from the 'recommended' list below first, and only introduce new attributes if nothing appropriate could be found.
	*/
	interface Module {
		/** Unique identifier for the module. */
		id: number | string;
		/** A name of the module. */
		name: string;
		/** Logical full path to the module. The exact definition is implementation defined, but usually this would be a full path to the on-disk file for the module. */
		path?: string;
		/** True if the module is optimized. */
		isOptimized?: boolean;
		/** True if the module is considered 'user code' by a debugger that supports 'Just My Code'. */
		isUserCode?: boolean;
		/** Version of Module. */
		version?: string;
		/** User-understandable description of if symbols were found for the module (ex: 'Symbols Loaded', 'Symbols not found', etc. */
		symbolStatus?: string;
		/** Logical full path to the symbol file. The exact definition is implementation defined. */
		symbolFilePath?: string;
		/** Module created or modified, encoded as a RFC 3339 timestamp. */
		dateTimeStamp?: string;
		/** Address range covered by this module. */
		addressRange?: string;
	}

	/** A ColumnDescriptor specifies what module attribute to show in a column of the ModulesView, how to format it,
		and what the column's label should be.
		It is only used if the underlying UI actually supports this level of customization.
	*/
	interface ColumnDescriptor {
		/** Name of the attribute rendered in this column. */
		attributeName: string;
		/** Header UI label of column. */
		label: string;
		/** Format to use for the rendered values in this column. TBD how the format strings looks like. */
		format?: string;
		/** Datatype of values in this column. Defaults to `string` if not specified. */
		type?: 'string' | 'number' | 'boolean' | 'unixTimestampUTC';
		/** Width of this column in characters (hint only). */
		width?: number;
	}

	/** The ModulesViewDescriptor is the container for all declarative configuration options of a ModuleView.
		For now it only specifies the columns to be shown in the modules view.
	*/
	interface ModulesViewDescriptor {
		columns: ColumnDescriptor[];
	}

	/** A Thread */
	interface Thread {
		/** Unique identifier for the thread. */
		id: number;
		/** The name of the thread. */
		name: string;
	}

	/** A Source is a descriptor for source code.
		It is returned from the debug adapter as part of a StackFrame and it is used by clients when specifying breakpoints.
	*/
	interface Source {
		/** The short name of the source. Every source returned from the debug adapter has a name.
			When sending a source to the debug adapter this name is optional.
		*/
		name?: string;
		/** The path of the source to be shown in the UI.
			It is only used to locate and load the content of the source if no sourceReference is specified (or its value is 0).
		*/
		path?: string;
		/** If the value > 0 the contents of the source must be retrieved through the `source` request (even if a path is specified).
			A `sourceReference` is only valid for a session, so it can not be used to persist a source.
			The value should be less than or equal to 2147483647 (2^31-1).
		*/
		sourceReference?: number;
		/** A hint for how to present the source in the UI.
			A value of `deemphasize` can be used to indicate that the source is not available or that it is skipped on stepping.
		*/
		presentationHint?: 'normal' | 'emphasize' | 'deemphasize';
		/** The origin of this source. For example, 'internal module', 'inlined content from source map', etc. */
		origin?: string;
		/** A list of sources that are related to this source. These may be the source that generated this source. */
		sources?: Source[];
		/** Additional data that a debug adapter might want to loop through the client.
			The client should leave the data intact and persist it across sessions. The client should not interpret the data.
		*/
		adapterData?: any;
		/** The checksums associated with this file. */
		checksums?: Checksum[];
	}

	/** A Stackframe contains the source location. */
	interface StackFrame {
		/** An identifier for the stack frame. It must be unique across all threads.
			This id can be used to retrieve the scopes of the frame with the `scopes` request or to restart the execution of a stackframe.
		*/
		id: number;
		/** The name of the stack frame, typically a method name. */
		name: string;
		/** The source of the frame. */
		source?: Source;
		/** The line within the source of the frame. If the source attribute is missing or doesn't exist, line is 0 and should be ignored by the client. */
		line: number;
		/** The column within the line. If source attribute is missing or doesn't exist, column is 0 and should be ignored by the client. */
		column: number;
		/** The end line of the range covered by the stack frame. */
		endLine?: number;
		/** The end column of the range covered by the stack frame. */
		endColumn?: number;
		/** Indicates whether this frame can be restarted with the `restart` request. Clients should only use this if the debug adapter supports the `restart` request and the corresponding capability `supportsRestartRequest` is true. */
		canRestart?: boolean;
		/** A memory reference for the current instruction pointer in this frame. */
		instructionPointerReference?: string;
		/** The module associated with this frame, if any. */
		moduleId?: number | string;
		/** A hint for how to present this frame in the UI.
			A value of `label` can be used to indicate that the frame is an artificial frame that is used as a visual label or separator. A value of `subtle` can be used to change the appearance of a frame in a 'subtle' way.
		*/
		presentationHint?: 'normal' | 'label' | 'subtle';
	}

	/** A Scope is a named container for variables. Optionally a scope can map to a source or a range within a source. */
	interface Scope {
		/** Name of the scope such as 'Arguments', 'Locals', or 'Registers'. This string is shown in the UI as is and can be translated. */
		name: string;
		/** A hint for how to present this scope in the UI. If this attribute is missing, the scope is shown with a generic UI.
			Values: 
			'arguments': Scope contains method arguments.
			'locals': Scope contains local variables.
			'registers': Scope contains registers. Only a single `registers` scope should be returned from a `scopes` request.
			etc.
		*/
		presentationHint?: 'arguments' | 'locals' | 'registers' | string;
		/** The variables of this scope can be retrieved by passing the value of variablesReference to the VariablesRequest. */
		variablesReference: number;
		/** The number of named variables in this scope.
			The client can use this information to present the variables in a paged UI and fetch them in chunks.
		*/
		namedVariables?: number;
		/** The number of indexed variables in this scope.
			The client can use this information to present the variables in a paged UI and fetch them in chunks.
		*/
		indexedVariables?: number;
		/** If true, the number of variables in this scope is large or expensive to retrieve. */
		expensive: boolean;
		/** The source for this scope. */
		source?: Source;
		/** The start line of the range covered by this scope. */
		line?: number;
		/** The start column of the range covered by this scope. */
		column?: number;
		/** The end line of the range covered by this scope. */
		endLine?: number;
		/** The end column of the range covered by this scope. */
		endColumn?: number;
	}

	/** A Variable is a name/value pair.
		The `type` attribute is shown if space permits or when hovering over the variable's name.
		The `kind` attribute is used to render additional properties of the variable, e.g. different icons can be used to indicate that a variable is public or private.
		If the value is structured (has children), a handle is provided to retrieve the children with the VariablesRequest.
		If the number of named or indexed children is large, the numbers should be returned via the `namedVariables` and `indexedVariables` attributes.
		The client can use this information to present the children in a paged UI and fetch them in chunks.
	*/
	interface Variable {
		/** The variable's name. */
		name: string;
		/** The variable's value.
			This can be a multi-line text, e.g. for a function the body of a function.
			For structured variables (which do not have a simple value), it is recommended to provide a one-line representation of the structured object. This helps to identify the structured object in the collapsed state when its children are not yet visible.
			An empty string can be used if no value should be shown in the UI.
		*/
		value: string;
		/** The type of the variable's value. Typically shown in the UI when hovering over the value.
			This attribute should only be returned by a debug adapter if the corresponding capability `supportsVariableType` is true.
		*/
		type?: string;
		/** Properties of a variable that can be used to determine how to render the variable in the UI. */
		presentationHint?: VariablePresentationHint;
		/** The evaluatable name of this variable which can be passed to the `evaluate` request to fetch the variable's value. */
		evaluateName?: string;
		/** If variablesReference is > 0, the variable is structured and its children can be retrieved by passing variablesReference to the VariablesRequest. */
		variablesReference: number;
		/** The number of named child variables.
			The client can use this information to present the children in a paged UI and fetch them in chunks.
		*/
		namedVariables?: number;
		/** The number of indexed child variables.
			The client can use this information to present the children in a paged UI and fetch them in chunks.
		*/
		indexedVariables?: number;
		/** The memory reference for the variable if the variable represents executable code, such as a function pointer.
			This attribute is only required if the corresponding capability `supportsMemoryReferences` is true.
		*/
		memoryReference?: string;
	}

	/** Properties of a variable that can be used to determine how to render the variable in the UI. */
	interface VariablePresentationHint {
		/** The kind of variable. Before introducing additional values, try to use the listed values.
			Values: 
			'property': Indicates that the object is a property.
			'method': Indicates that the object is a method.
			'class': Indicates that the object is a class.
			'data': Indicates that the object is data.
			'event': Indicates that the object is an event.
			'baseClass': Indicates that the object is a base class.
			'innerClass': Indicates that the object is an inner class.
			'interface': Indicates that the object is an interface.
			'mostDerivedClass': Indicates that the object is the most derived class.
			'virtual': Indicates that the object is virtual, that means it is a synthetic object introduced by the adapter for rendering purposes, e.g. an index range for large arrays.
			'dataBreakpoint': Deprecated: Indicates that a data breakpoint is registered for the object. The `hasDataBreakpoint` attribute should generally be used instead.
			etc.
		*/
		kind?: 'property' | 'method' | 'class' | 'data' | 'event' | 'baseClass' | 'innerClass' | 'interface' | 'mostDerivedClass' | 'virtual' | 'dataBreakpoint' | string;
		/** Set of attributes represented as an array of strings. Before introducing additional values, try to use the listed values.
			Values: 
			'static': Indicates that the object is static.
			'constant': Indicates that the object is a constant.
			'readOnly': Indicates that the object is read only.
			'rawString': Indicates that the object is a raw string.
			'hasObjectId': Indicates that the object can have an Object ID created for it.
			'canHaveObjectId': Indicates that the object has an Object ID associated with it.
			'hasSideEffects': Indicates that the evaluation had side effects.
			'hasDataBreakpoint': Indicates that the object has its value tracked by a data breakpoint.
			etc.
		*/
		attributes?: ('static' | 'constant' | 'readOnly' | 'rawString' | 'hasObjectId' | 'canHaveObjectId' | 'hasSideEffects' | 'hasDataBreakpoint' | string)[];
		/** Visibility of variable. Before introducing additional values, try to use the listed values.
			Values: 'public', 'private', 'protected', 'internal', 'final', etc.
		*/
		visibility?: 'public' | 'private' | 'protected' | 'internal' | 'final' | string;
		/** If true, clients can present the variable with a UI that supports a specific gesture to trigger its evaluation.
			This mechanism can be used for properties that require executing code when retrieving their value and where the code execution can be expensive and/or produce side-effects. A typical example are properties based on a getter function.
			Please note that in addition to the `lazy` flag, the variable's `variablesReference` is expected to refer to a variable that will provide the value through another `variable` request.
		*/
		lazy?: boolean;
	}

	/** Properties of a breakpoint location returned from the `breakpointLocations` request. */
	interface BreakpointLocation {
		/** Start line of breakpoint location. */
		line: number;
		/** The start column of breakpoint location. */
		column?: number;
		/** The end line of breakpoint location if the location covers a range. */
		endLine?: number;
		/** The end column of breakpoint location if the location covers a range. */
		endColumn?: number;
	}

	/** Properties of a breakpoint or logpoint passed to the setBreakpoints request. */
	interface SourceBreakpoint {
		/** The source line of the breakpoint or logpoint. */
		line: number;
		/** The source column of the breakpoint. */
		column?: number;
		/** The expression for conditional breakpoints.
			It is only honored by a debug adapter if the corresponding capability `supportsConditionalBreakpoints` is true.
		*/
		condition?: string;
		/** The expression that controls how many hits of the breakpoint are ignored.
			The debug adapter is expected to interpret the expression as needed.
			The attribute is only honored by a debug adapter if the corresponding capability `supportsHitConditionalBreakpoints` is true.
		*/
		hitCondition?: string;
		/** If this attribute exists and is non-empty, the debug adapter must not 'break' (stop)
			but log the message instead. Expressions within `{}` are interpolated.
			The attribute is only honored by a debug adapter if the corresponding capability `supportsLogPoints` is true.
		*/
		logMessage?: string;
	}

	/** Properties of a breakpoint passed to the setFunctionBreakpoints request. */
	interface FunctionBreakpoint {
		/** The name of the function. */
		name: string;
		/** An expression for conditional breakpoints.
			It is only honored by a debug adapter if the corresponding capability `supportsConditionalBreakpoints` is true.
		*/
		condition?: string;
		/** An expression that controls how many hits of the breakpoint are ignored.
			The debug adapter is expected to interpret the expression as needed.
			The attribute is only honored by a debug adapter if the corresponding capability `supportsHitConditionalBreakpoints` is true.
		*/
		hitCondition?: string;
	}

	/** This enumeration defines all possible access types for data breakpoints. */
	type DataBreakpointAccessType = 'read' | 'write' | 'readWrite';

	/** Properties of a data breakpoint passed to the setDataBreakpoints request. */
	interface DataBreakpoint {
		/** An id representing the data. This id is returned from the dataBreakpointInfo request. */
		dataId: string;
		/** The access type of the data. */
		accessType?: DataBreakpointAccessType;
		/** An expression for conditional breakpoints. */
		condition?: string;
		/** An expression that controls how many hits of the breakpoint are ignored.
			The debug adapter is expected to interpret the expression as needed.
		*/
		hitCondition?: string;
	}

	/** Properties of a breakpoint passed to the setInstructionBreakpoints request */
	interface InstructionBreakpoint {
		/** The instruction reference of the breakpoint.
			This should be a memory or instruction pointer reference from an EvaluateResponse, Variable, StackFrame, GotoTarget, or Breakpoint.
		*/
		instructionReference: string;
		/** The offset from the instruction reference.
			This can be negative.
		*/
		offset?: number;
		/** An expression for conditional breakpoints.
			It is only honored by a debug adapter if the corresponding capability `supportsConditionalBreakpoints` is true.
		*/
		condition?: string;
		/** An expression that controls how many hits of the breakpoint are ignored.
			The debug adapter is expected to interpret the expression as needed.
			The attribute is only honored by a debug adapter if the corresponding capability `supportsHitConditionalBreakpoints` is true.
		*/
		hitCondition?: string;
	}

	/** Information about a Breakpoint created in setBreakpoints, setFunctionBreakpoints, setInstructionBreakpoints, or setDataBreakpoints. */
	interface Breakpoint {
		/** The identifier for the breakpoint. It is needed if breakpoint events are used to update or remove breakpoints. */
		id?: number;
		/** If true, the breakpoint could be set (but not necessarily at the desired location). */
		verified: boolean;
		/** A message about the state of the breakpoint.
			This is shown to the user and can be used to explain why a breakpoint could not be verified.
		*/
		message?: string;
		/** The source where the breakpoint is located. */
		source?: Source;
		/** The start line of the actual range covered by the breakpoint. */
		line?: number;
		/** The start column of the actual range covered by the breakpoint. */
		column?: number;
		/** The end line of the actual range covered by the breakpoint. */
		endLine?: number;
		/** The end column of the actual range covered by the breakpoint.
			If no end line is given, then the end column is assumed to be in the start line.
		*/
		endColumn?: number;
		/** A memory reference to where the breakpoint is set. */
		instructionReference?: string;
		/** The offset from the instruction reference.
			This can be negative.
		*/
		offset?: number;
	}

	/** The granularity of one 'step' in the stepping requests `next`, `stepIn`, `stepOut`, and `stepBack`.
		'statement': The step should allow the program to run until the current statement has finished executing.
		The meaning of a statement is determined by the adapter and it may be considered equivalent to a line.
		For example 'for(int i = 0; i < 10; i++)' could be considered to have 3 statements 'int i = 0', 'i < 10', and 'i++'.
		'line': The step should allow the program to run until the current source line has executed.
		'instruction': The step should allow one instruction to execute (e.g. one x86 instruction).
	*/
	type SteppingGranularity = 'statement' | 'line' | 'instruction';

	/** A StepInTarget can be used in the `stepIn` request and determines into which single target the stepIn request should step. */
	interface StepInTarget {
		/** Unique identifier for a stepIn target. */
		id: number;
		/** The name of the stepIn target (shown in the UI). */
		label: string;
		/** The line of the step in target. */
		line?: number;
		/** The column of the step in target. */
		column?: number;
		/** The end line of the range covered by the step in target. */
		endLine?: number;
		/** The end column of the range covered by the step in target. */
		endColumn?: number;
	}

	/** A GotoTarget describes a code location that can be used as a target in the `goto` request.
		The possible goto targets can be determined via the `gotoTargets` request.
	*/
	interface GotoTarget {
		/** Unique identifier for a goto target. This is used in the goto request. */
		id: number;
		/** The name of the goto target (shown in the UI). */
		label: string;
		/** The line of the goto target. */
		line: number;
		/** The column of the goto target. */
		column?: number;
		/** The end line of the range covered by the goto target. */
		endLine?: number;
		/** The end column of the range covered by the goto target. */
		endColumn?: number;
		/** A memory reference for the instruction pointer value represented by this target. */
		instructionPointerReference?: string;
	}

	/** CompletionItems are the suggestions returned from the CompletionsRequest. */
	interface CompletionItem {
		/** The label of this completion item. By default this is also the text that is inserted when selecting this completion. */
		label: string;
		/** If text is returned and not an empty string, then it is inserted instead of the label. */
		text?: string;
		/** A string that should be used when comparing this item with other items. If not returned or an empty string, the `label` is used instead. */
		sortText?: string;
		/** A human-readable string with additional information about this item, like type or symbol information. */
		detail?: string;
		/** The item's type. Typically the client uses this information to render the item in the UI with an icon. */
		type?: CompletionItemType;
		/** This value determines the location (in the `completions` request's `text` attribute) where the completion text is added.
			If missing the text is added at the location specified by the `completions` request's `column` attribute.
		*/
		start?: number;
		/** This value determines how many characters are overwritten by the completion text.
			If missing the value 0 is assumed which results in the completion text being inserted.
		*/
		length?: number;
		/** Determines the start of the new selection after the text has been inserted (or replaced).
			The start position must be in the range 0 and length of the completion text.
			If omitted the selection starts at the end of the completion text.
		*/
		selectionStart?: number;
		/** Determines the length of the new selection after the text has been inserted (or replaced).
			The selection can not extend beyond the bounds of the completion text.
			If omitted the length is assumed to be 0.
		*/
		selectionLength?: number;
	}

	/** Some predefined types for the CompletionItem. Please note that not all clients have specific icons for all of them. */
	type CompletionItemType = 'method' | 'function' | 'constructor' | 'field' | 'variable' | 'class' | 'interface' | 'module' | 'property' | 'unit' | 'value' | 'enum' | 'keyword' | 'snippet' | 'text' | 'color' | 'file' | 'reference' | 'customcolor';

	/** Names of checksum algorithms that may be supported by a debug adapter. */
	type ChecksumAlgorithm = 'MD5' | 'SHA1' | 'SHA256' | 'timestamp';

	/** The checksum of an item calculated by the specified algorithm. */
	interface Checksum {
		/** The algorithm used to calculate this checksum. */
		algorithm: ChecksumAlgorithm;
		/** Value of the checksum, encoded as a hexadecimal value. */
		checksum: string;
	}

	/** Provides formatting information for a value. */
	interface ValueFormat {
		/** Display the value in hex. */
		hex?: boolean;
	}

	/** Provides formatting information for a stack frame. */
	interface StackFrameFormat extends ValueFormat {
		/** Displays parameters for the stack frame. */
		parameters?: boolean;
		/** Displays the types of parameters for the stack frame. */
		parameterTypes?: boolean;
		/** Displays the names of parameters for the stack frame. */
		parameterNames?: boolean;
		/** Displays the values of parameters for the stack frame. */
		parameterValues?: boolean;
		/** Displays the line number of the stack frame. */
		line?: boolean;
		/** Displays the module of the stack frame. */
		module?: boolean;
		/** Includes all stack frames, including those the debug adapter might otherwise hide. */
		includeAll?: boolean;
	}

	/** An ExceptionFilterOptions is used to specify an exception filter together with a condition for the `setExceptionBreakpoints` request. */
	interface ExceptionFilterOptions {
		/** ID of an exception filter returned by the `exceptionBreakpointFilters` capability. */
		filterId: string;
		/** An expression for conditional exceptions.
			The exception breaks into the debugger if the result of the condition is true.
		*/
		condition?: string;
	}

	/** An ExceptionOptions assigns configuration options to a set of exceptions. */
	interface ExceptionOptions {
		/** A path that selects a single or multiple exceptions in a tree. If `path` is missing, the whole tree is selected.
			By convention the first segment of the path is a category that is used to group exceptions in the UI.
		*/
		path?: ExceptionPathSegment[];
		/** Condition when a thrown exception should result in a break. */
		breakMode: ExceptionBreakMode;
	}

	/** This enumeration defines all possible conditions when a thrown exception should result in a break.
		never: never breaks,
		always: always breaks,
		unhandled: breaks when exception unhandled,
		userUnhandled: breaks if the exception is not handled by user code.
	*/
	type ExceptionBreakMode = 'never' | 'always' | 'unhandled' | 'userUnhandled';

	/** An ExceptionPathSegment represents a segment in a path that is used to match leafs or nodes in a tree of exceptions.
		If a segment consists of more than one name, it matches the names provided if `negate` is false or missing, or it matches anything except the names provided if `negate` is true.
	*/
	interface ExceptionPathSegment {
		/** If false or missing this segment matches the names provided, otherwise it matches anything except the names provided. */
		negate?: boolean;
		/** Depending on the value of `negate` the names that should match or not match. */
		names: string[];
	}

	/** Detailed information about an exception that has occurred. */
	interface ExceptionDetails {
		/** Message contained in the exception. */
		message?: string;
		/** Short type name of the exception object. */
		typeName?: string;
		/** Fully-qualified type name of the exception object. */
		fullTypeName?: string;
		/** An expression that can be evaluated in the current scope to obtain the exception object. */
		evaluateName?: string;
		/** Stack trace at the time the exception was thrown. */
		stackTrace?: string;
		/** Details of the exception contained by this exception, if any. */
		innerException?: ExceptionDetails[];
	}

	/** Represents a single disassembled instruction. */
	interface DisassembledInstruction {
		/** The address of the instruction. Treated as a hex value if prefixed with `0x`, or as a decimal value otherwise. */
		address: string;
		/** Raw bytes representing the instruction and its operands, in an implementation-defined format. */
		instructionBytes?: string;
		/** Text representing the instruction and its operands, in an implementation-defined format. */
		instruction: string;
		/** Name of the symbol that corresponds with the location of this instruction, if any. */
		symbol?: string;
		/** Source location that corresponds to this instruction, if any.
			Should always be set (if available) on the first instruction returned,
			but can be omitted afterwards if this instruction maps to the same source file as the previous instruction.
		*/
		location?: Source;
		/** The line within the source location that corresponds to this instruction, if any. */
		line?: number;
		/** The column within the line that corresponds to this instruction, if any. */
		column?: number;
		/** The end line of the range that corresponds to this instruction, if any. */
		endLine?: number;
		/** The end column of the range that corresponds to this instruction, if any. */
		endColumn?: number;
	}

	/** Logical areas that can be invalidated by the `invalidated` event.
		Values: 
		'all': All previously fetched data has become invalid and needs to be refetched.
		'stacks': Previously fetched stack related data has become invalid and needs to be refetched.
		'threads': Previously fetched thread related data has become invalid and needs to be refetched.
		'variables': Previously fetched variable data has become invalid and needs to be refetched.
		etc.
	*/
	type InvalidatedAreas = 'all' | 'stacks' | 'threads' | 'variables' | string;
}

